Zinsser 22616 Roll-A-Tex Sand Texture Additive, 1 Pound

Works great to add some texture to your smooth walls. Easy to add to paint

I added this entire box to 3/4 gallon of Kilz to use to prep a wall were a big built in TV hutch had been. The wall was pretty patched up to fix all the holes after the hutch was demolished. After adding the sand, the Kilz was about as thick as pancake batter - THICK! But, it went on the wall fairly easily with a medium nap roller and it looked great after it was finished with the Kilz. We couldn't find a single blemish where there were once at least a hundred before! And now, with two coats of paint on the wall, the texturing matches the rest of the walls perfectly. Very happy customers and very highly recommended!

I purchased this product because I had walls that were already painted with a sand texture, and I had done some wall repair culminating in sanding some areas smooth. Therefore, i wanted this additive to use with the new paint so the walls would have a sand-like texture and not show the smooth repair areas. To that end, this product worked great. I added the 1 pound box to a gallon of paint, and it covered very well. No smooth spots. HOWEVER, here are two things to keep in mind when applying. First, the instructions say to mix this in a separate container because you won't have enough room in your one-gallon paint can -- this is very true. What the instructions didn't make clear is that adding this product to paint will noticeable REDUCE the coverage of your paint. I used MUCH more paint to cover the room I was painting than I would have painting a room of similar size with just paint (without additive). So when you calculate coverage, cut it in half (approximately) when using this additive. Second, when applying this with a roller (I used a 3/4" nap roller cover), make sure there is plenty of paint (with additive added) on the roller cover! Under normal circumstances, you roll some paint on the roller, apply it to the wall, and then apply a little pressure to squeeze paint out of the roller. DO NOT do that with this additive in the paint. Instead, apply paint to the roller cover, roll paint on the wall, and as soon as you start running even a little low on paint on the roller cover, reload. If you try to "squeeze" paint out of the roller cover with this additive, you will get big clumps of sandy additive on the wall, rather than even application. If you apply it with plenty of paint on the roller, the additive spreads out smoothly and you get nice, even coverage and a great sandy texture which is actually excellent at covering wall imperfections. SO: expect less coverage and make sure you keep plenty of paint on the roller cover, and you should have good results. Once I realized this, I found this to be an excellent additive that covered my walls just as I had expected.

Bought an older home and struggled to match the texture on the walls. So I used half a box of this in a gallon of paint and it hid all those differences. It does seem to settle so I would recommend only mixing the paint you’ll use with a couple of days. I found that once it settles it didn’t mix back in very well. But, even with that, it works great with a bit of preparation and planning. It does make the walls very rough, so I would recommend using the texture on the first coat and then just paint the second coat to smooth out the roughness some.

Purchased to use in 1 gal of paint in my daughter's room. The product itself is easy to mix. There's no room in the can for it, so you need a separate mixing set up. Def use a paint mixer. Makes it easier on you, but you can totally do it by hand. The paint becomes thick. If paint sits for a while in between coats, like next day as mine did, mix it again. I felt like the grains settled down. I used a thicker nap roller so not sure how a foam roller would perform. Paint was easy to apply and covered well. The texture rough. I did 2 coats. I had splatter that I don't normally have with plain paint, probably because of the longer nap and thicker consistency. I wasn't able to clear the room before painting so I was working around furniture. I would def cover the floors and any furniture that is close to where you're painting. My daughter loves it, but it's not my style or choice of texture.

I loved the Sandwash products Home Depot used to sell and I bought this product to try and replicate the finish. The finish looks ok, but it feels like sandpaper. If you brushed up against it with bare skin it would rip through it like sandpaper. It feels like sandpaper... rough sandpaper.

Great! Easier to use than the brand I got at Home Depot.

This texture is consistent in its sand size and very easy to mix in. Very little color change. I use this for texture in the miniatures that I build. The "craft" texture is $20 for 1/3 this size. Great deal!