TP-Link Tri-Band WiFi 7 BE10000 Whole Home Mesh System (Deco BE63) | 6-Stream 10 Gbps | 4 × 2.5G Ports Wired Backhaul, 4× Smart Internal Antennas | VPN, AI-Roaming, MU-MIMO, HomeShield (3-Pack)

Love these things. I set these up as a mesh system for the ground floor, which doesn't have any router signal. Just connect one of them by Ethernet, then let the rest repeat off of that. You'll get great coverage for the entire ground floor. Also, setup is super easy as TP-Link has a great app for this. Thinking of buying another pack just to extend coverage even more.

Easy to set up, app connects quickly, and the speeds are top notch. Probably the best option for the price.

I ordered the TP-Link Deco BE63 about a week ago, and I can confidently say this is the best investment I’ve ever made for my home Wi-Fi. Setup was effortless—truly one of the easiest tech installations I’ve ever experienced. I had the entire system up and running in minutes, and switching it to Access Point mode was a breeze. Be sure to visit TP-Link's website and read the article on setting up the Deco for Access Point mode if you just want to piggyback off your original router. For the first time ever, my entire home—every square inch—has a strong and consistent Wi-Fi signal. Even areas that were always dead zones now have full bars, and I’m getting incredibly fast speeds everywhere, including outside the house. It’s honestly a night-and-day difference. The coverage, reliability, and speed are outstanding, and placing the units throughout my home worked exactly as advertised. My only regret is not buying these sooner. If you're tired of spotty Wi-Fi and constant signal drop-offs, don’t hesitate—this mesh system delivers exactly what it promises and more. ** My internet is provided through FiOS, and these units work flawlessly with the G3100. ** Thank you for reading, and I highly recommend this product!

TLDR: Deco BE83 (BE10000) is just as fast as BE95 (BE33000) for most homes but silent/no fans. If you normally opt for the latest & greatest hardware, a word of caution, I originally went with the Deco BE95 but found it to be overkill. Unless you have faster than 2.5Gbps fiber internet coming into your home + Cat6 Ethernet cables + a fast switch, the Deco BE95 will be no faster the cheaper WiFi 7 Deco BE83. The Deco BE95s are big and can emit noticeable noise when the fans kick in. Deco BE83s have no fans and run quiet. The Deco App and setup is good. Config is App-only. I've used web-based/IP address config for older systems but find the app to be a better experience overall. The phone app is MUCH better designed than the desktop app. I wouldn’t bother with the desktop app TBH. Overall the physical design of the Deco BE95s and BE63s are good and I appreciate that they're plain white cylinders. The LEDs can be turned off on both (permanently or on a schedule, at night for instance) which is great. The external transformer of the BE95s are larger bricks & AC power cables that can create a cable mess. The BE63s have smaller, more normal, plug-in-wall power bricks. I like these mounts to hang on the wall from Bangcheer: Wall Mount for TP-Link Deco BE63/ BE65/BE67/BE68/BE10000/BE11000/BE14000 Mesh Wi-Fi 7 System, Saving Space Aluminum Alloy Wall Hanging Bracket Holder with Cable Storage Rack (White-2Pack). Some older switches (Cisco SG200 Smart Switch for example) don’t work with the Deco’s IEEE 1905.1 Ethernet Backhaul Protocol. I had to temporarily wire the Decos in series before they hit the switch to make wired backhaul work. Deco will opt for WiFi backhaul on its own if the Ethernet isn’t up to snuff. A new Ubuquiti Pro Max 16 switch replaced the old Cisco and remedied the issue and now all nodes are plugged directly into the switch rather than in series. TP-Link switches also are said to work for Ethernet backhauls without issue. But I wanted a fan-less 16-port 2.5Gbps switch and TP-Link options weren’t great in that dept. I setup a three node Deco BE95 system. It was zippy and worked well but I didn’t like the fan noise. So I changed to a three node Deco BE83 system and haven't notice any drop in performance. BE63s run cooler, no fans, and deliver the same speed if you're under 2.5Gbps internet service into your building.

I've been thinking about upgrading to a mesh network for decades--long before they existed. Instead, I've had to position three WiFi routers in strategic places in my two-story home to keep my plethora of WiFi devices connected and to accommodate my guests who bring their own phones, laptops, tablets and other personal devices that suck the bandwidth out of my 1G/1G network. They all required periodic maintenance to keep the firmware up to date and to guard against hackers. So, the Deco packaging and installation was easy enough--for the first device--virtually plug and play. I was referred to the iPhone app for the remaining and the second device came up quickly, but I spent an hour trying to get the third to be added. I followed the instructions and moved it closer and closer to the initial router only to get to the point of returning all three. I decided to read the instructions again and it said it should just work. It had. After that, it was just a matter of finding the WiFi-enabled devices all over the home. The Ring doorbell cameras and lights, the thermostat, the Amazon Echo(s), the bathroom scale, and my own laptops and tablets. The problem is, older devices did not work with whatever 2.4Ghz DECO was providing. They all had to switch back to the older router to work. But, I did more research and found out how to emulate the old security protocols with the 2.4 I also discovered that for the first time (and I've been doing this since the '90s), the router only had 4 RJ45 ports. All of my previous TP-Link routers had one port to connect to the LAN backbone and four ports to connect to remote wired devices that didn't support WiFi. This meant one of my devices will remain disconnected until I wire an old 5-port switch to share one of the ports. The performance seems to be fine, but it only uses 2.4, 5 and 6Ghz, not 7 as promised. I'll might have to keep one of my old routers working to support the old 2.4Ghz devices that don't work with the DECO system--until I sort out the issues. My question is, with a device the size of a loaf of Whole Wheat bread, why not squeeze in another RJ45 port?