GateMate Long Throw Gate Lock 1490096, Euro Profile Keyed Both Sides Gate Lock for Sheds, Gates & Garage Doors, 316 Stainless Steel, for Wooden Gates & Doors Up to 2 ¾” Thick (70mm), Black, 5 Keys

Perfect slot voor tuinpoorten alleen goed opletten voor de maat omdat het op de foto niet echt duidelijk is US maten ik heb de duurste versie genomen en die was perfect en voelt heel sterk aan

Super robustes Torschloss. Einfach zu montieren, alles mit Dabei. Werkzeug zum Bohren des Loches für den Schließzylinder, Bohrer zum Vorbohren der Schraublöcher und incl. Torx für die Befestigungsschrauben. Einfach top.

I bought this lock for a shed that faces an alley and needs security. Its simple enough to install with the supplied template...the 19 mm bit included leaves a lot to be desired, so I used a hole saw instead. The screws are security style and the bit is included. With the 5 included keys, it saves a step of getting extra keys cut. The bolt is 19 mm square and solid. The entire set is superior quality.

A sturdy, well built and quality lock. Came with clear instructions, drill template and various bits needed to install the lock. Followed suggestions in the other reviews and: - did not bother with the pilot holes for the security screws, they went in fine without and will likely have a stronger grip. - used my own 18mm drill spade (for some reason a 19mm spade is provided even though the instructions ask for 18mm).

In the box you'll find the following: Lock assembly 5 keys Lock keep 8qty, T30 anti-tamper security screws T30 Security screw bit driver 2qty PH1 no3 stainless screws 19mm wood drill bit (useless) 4.5mm general drill bit (not sure what for) Chrome plated escutcheon 2 self adhesive drill templates Fixing instructions Lock dimensions: Lock barrel length from housing backplate (max gate thickness 74mm) Bolt throw RH mounting 81mm Bolt throw LH mounting 84mm Now the lock feels substantial, with its 18mm square bolt and the black powder coated housing and lock keep, both equally as heavy duty. Installation is relatively painless, after modifying my gate by adding a block of white oak to carry the new lock, the first thing I noticed, the self adhesive template struggled to stick to a soggy, rough sawn garden gate, nevertheless a bit of gaffa tape later I started to drill the two required 19mm holes that the lock goes through. Once drilled I moved onto mounting the lock, now it's worth mentioning that, as with most pressure treated wood, it's soft, with that the instructions called for me to drill the holes with a 3.5mm drill bit, yet the one enclosed was a 4.5mm, regardless that predrilled holes would only later weaken the screws grip of the gate timber I just sent the screws straight in, even the ones that went into the bone dry oak, with the use of a 9yo cordless drill, sank in without hesitation. The lock keep has a plastic insert with a sprung tab that is there to minimize gate rattle in high winds and looks like it should be OK in the long run, just make sure in installation that it's the correct way round before fastening down as the lock bolt will not fully lock if it's the wrong way. I had added some red grease to my lock just to help it in the long run, the lock barrel is a bespoke type and unlike common lock barrels that have a cam which turns with a key, this barrel uses a sprocket that drives the pin via its predrilled holes (as seen from underneath the bolt) this type of barrel is not a common variety on the market so would probably be hard to source. I did like the included anti-tamper screws (as I planned to use coach bolts, and may still swap two out later on the lock) but both of the drill bits included were a waste of time as the 19mm one bent while drilling the first hole, and had I used the enclosed 4.5mm drill bit, they would have opened the mounting holes too much and resulted in remounting the lock a second time leaving holes all over the place. Ive still rated it as a 5 star as the product is better than I expected and I would buy either this one again or another from this range now, granted the included drill bits were a bit useless but using my own wasn't a deal breaker as I already expected to use my own. Ease of installation 5* Instructions 4* Delivery 5* Build quality 5* Accessories 2*