Evolution Power Tools EVOMS1 Miter Saw Stand Compact & Folding, Universal Fits Most Brands, Quick Release Mounting Brackets, Rollers, End Stops for Repeat Cutting , Black

I love this stand. Not heavy and easy to set up. I bought it for my 10" compound miter saw. I also bought an extra set of rails from the company for my 12" compound sliding miter saw. It is about the perfect height for me. It's stable and sturdy with both saws and the functionality of the rollers is great. No more using the table saw or saw horses and piece of plywood to set the saw on.

I purchase this to use with their metal shop saw. That approximately 40 miter cuts to make. The infeed support turns around to support the material at a 45° cut. Supports material to keep it flat on the table of the saw. Alleviating one of the complaints people have about the Evolution cut off saw. Several well thought out features make it rather versatile. When you unfold the legs, at first they don't seem sturdy. Is a little bit of play. This is actually an advantage when you're setting the stand up on a surface that is not absolutely black. You can slay the legs to accommodate the surface, and it sits solid then. Mine came with a bent in feed support. One call a customer service, gave him the serial number and they shipped me a replacement no questions asked. It is nice to finally get away from cutting on the ground. It's not perfect, but I am very pleased with it.

I ordered this to use with my Ryobi mitre saw. Assembly was simple enough, I had the stand put together and my saw mounted in about 40 min. The stand is heavy and very sturdy. The only issue i had was a plastic piece attached to the bottom of the saw mounting bar was broken out of the box. The part is of little consequence and i'm sure I can get a replacement. Other than that, this is a great saw stand and a good value.

This was a replacement for a Dewalt stand that walked off a job site. This is a very decent stand - especially for the price. The entire stand feels substantial and solid which makes the few drawbacks all the more frustrating. #1 - the knobs used for making adjustments thread through nuts that have been tack welded to the frame, the welds do not inspire confidence. #2 - the hardware used to anchor the saw is undersized. I was able to use the Dewalt hardware but had to get out the drill to enlarge the anchor slot. #3 - storing it. The dewalt stand you could just fold up and lean in a corner - no issues. This stand uses knobs on each end of the assembly so if you want to just stand it on it's end its resting on the knob which isn't great. Still it's very good for the price and I don't regret getting it. PS- it is heavier than the Dewalt and the stop / roller support does not extend out as far as the Dewalt.

Quality product worked well with my Milwaukee chop saw.

Nowhere in the description does it say anything about hardware to mount the saw so I was hesitant to buy at first. It comes with two sets of different length bolts, nuts, washers, wing nuts, and split washers. Assembly was very straight forward without any instructions needed. Took me about 20 minutes after I unpacked everything to get it together. This thing is built like a tank and sets up quickly. Another thing was I wasn't sure if my saw would fit. Anything under 15 inch bolt pattern will mount easily. The saw I used is a Kobalt 7-1/4 compact sliding single-bevel miter saw item # 5265149 at lowes. Hope this helps anybody out there looking for info

Stand is pretty easy to setup, but there are some issues that you need to be aware of. #1, if you are mounting an Evolution Miter saw on this Evolution Miter Saw Stand, be aware that the included bolts are too short. They will not go all the way through the rear of the saw platform. #2, this stand has quite a bit of flex and it seems as if it's not built strong enough for mounting an Evolution Miter Saw to. We're got it mounted up now, but it seems too wobbly to last in the long term. The work support rollers are nice, but I don't know how long this stand will last.

I bought This stand to make a complete set for my newly purchased miter saw. The stand was packaged well and made it through the delivery process unscathed. Upon opening I was able to assemble with a little head scratching as the instructions were mainly pictures that left something to be desired. Once assembled, I was able to use my saw flawlessly. This is a heavy stand with an adequate base to prevent tipping. The rollers will adjust both horizontal and vertical, I cannot remember exact horizontal figures but it is more than adequate for users. The side rail roller system permits an adequate support for longer boards. The fast attach mounting for the saw took a minute to figure out properly but is very functional. I will go on record that I am NOT A PROESSIONAL CONTRACTOR, but I believe this would suffice for most anyone. I would not hesitate buying another if I were to add to my tooling, which is highly probable. I would highly recommend this stand!

Great and fast delivery..Just purchased a new Mitre Saw and was thinking of building my own table until I saw this guy, it's a fair price, easy to errect, although I did watch a Youtube Video first, never the less it's pretty easy to put up. It is pretty solid, my Ryobi fits nicely, taking the saw off and putting on is a doddle, the stand folds down fairly flat and can be stowed standing up in the corner or placed unded the workbench like mine is, all in all I am pleased with this purchase.

Probé el mismo artículo en una conocido centro alemán, y lo tuve que devolver dos veces por defectos de fabricación, mirando en amazon vi este modelo a un precio algo mas caro pero asequible, y al montarlo, quedé impresionado, calidad 100% estabilidad 100% un soporte como tiene que ser un soporte.

Ein toller und stabiler Block für meine Einhell-Kappsäge. Die Ausführung ist schwer und stabil, was sehr gut ist. Die Beine lassen sich einfach ein und ausklappen. Die Bedienungsanleitung kommt in mehreren Sprachen und war größtenteils verständlich. Die Fotos hätten gerne größer sein können, den Details lassen sich schwer erkennen. Man kann eine kostenlose Garantieverlängerung auf 3 Jahre durchführen. Der Aufbau war einfach und eigentlich selbsterklärend. Ich bin nur stutzig geworden, weil ich nicht alle Schrauben gebraucht habe. Ich glaube, dass je nach Bauweise der installierten Säge andere Schrauben hätten genutzt werden können. Das ging aus der Bedienungsanleitung jedoch nicht hervor. Sehr gut finde ich, dass der Hersteller komplett ohne Plastik bei der Verpackung auskommt. Alles war sicher und gut in Karton verpackt! 👍 Die Bedienung ist einfach und selbsterklärend. Die Träger lassen sich in der Höhe und Länge frei verstellen, was ein sicheres Arbeiten ermöglicht. Ich bin sehr zufrieden.

Quick delivery great seller nice item

Perfect companion to the Evolution cutoff saw. Wide stable footprint.