ESD Mat Workstation Ground Kit - 15' Common Point with Banana Plug, Universal Snap Kit, Banana Plug Adapter, 6' Coil Cord with Alligator Clip, Black Fabric Wrist Band 4mm

Static Care ESD Mat Workstation Ground Kit - my mat did not come with a snap and I was too impatient to install the provide snap to it when I used this so I used a binder clip as a temporary solution. I was working on a PC with my nephew and got this so we could both have a grounding strap. it worked perfectly. the longer cable was nice since last time I used my grounding strap I needed to use a power strip to get closer to my work surface. I will tape it down next time.

Works great! Tested with ohm meter and it checks out.

$15 would be the sweet spot for this.But it does give you what is needed to ground you true anti-static mat safely, as well as your self.Found the 1meg ohm resistance to be where it should be.The snap works fairly well. wrist strap works well. It'll wear like any other. I'm not a small guy, I can open up the strap enough to go up above my elbow so it's not dragging across my work area via my wrist.

Nice grounding kit I'm using with a static mat I also bought on Amazon. The double ground clicked right on to the existing anchor on the mat so I didn't need the included hardware. The wrist strap is good too. My three monitors used to black out due to my static electricity. After grounding the mat using this kit, I rested my keyboard on it and always have contact with my arms which solved the problem.

Despite being labeled 1 megaohm, the two-jack block has less than 1 ohm of resistance between any two points on it and the male banana jack at the far end of the cable. The wall plug also has negligible resistance. The only significant resistance is 1 megaohm in the coiled cord with a snap-socket on one end and banana jack on the other for connecting the wristband.

The media could not be loaded. The wristband wiring includes a one Megaohm resistor to protect you if you come in contact with high voltage. Another reviewer thought the wiring wasn’t connected because he set his meter to Kilohms opposed to Megaohms so he didn’t get a reading.

Agreed with the other people saying this is garbage. The screws to attach this product to the mat are not the right type. The snap won't snap.

Tested the continuity of all wiring and the coiled ground wire doesn’t have any. There is a disconnect somewhere in the wiring so the product is useless. The rest works as intended, but I can’t use anything without the coiled wire.