WarmLi 12 GPU Open Air Mining Rig Frame Mining Case Rack Motherboard Bracket Computer Case Miner for 12 GPUs Like 1660 Or 8-10 Like 3060,30 Days

This rig is very good, it includes everything necessary for installation and supports large graphics without problems.

I built my first rig out of wood and it was heavy and not exactly sturdy. This was very easy to assemble and extremely sturdy. I fit 8 GPUs on with no issues and it made transporting the rig a lot easier and accident-free too. While mining isn't what it used to be a few months ago, I still have my rig setup for the next bull run. Now is the time to get this stuff since when mining gets hot, these things will be very expensive (which is why I went with the home built wood frame in the first place).

So far, I’ve bought three of these. I’ve never thought I’d ever have to differentiate quality between cheaper brands but in this case, after ordering a 6xgpu frame(as shown in top of photo) from another brand with the same exact “design”, I would like to commend you guys for making a solid product, with simple and easy setup and common screw configuration. Wow!If you want consistency and need to scale with relatively low cost you’re in the right place.Only downside is that while it fits nice and compact, you are putting a lot in a small space, and should be careful with wires as they will hang out. I added 120mm delta fans to mine, and had to bolt from outside to inside but haven’t had issues otherwise

I currently have three of these frames. Assembly is a breeze. Once assembled, the frame is sturdy enough with the GPUs mounted to move around at will but with care. A low mounted CPU cooler is a must to provide clearance from the center support bar. Speaking of the center support bar, there is only one screw hole in the side bars to mount the center support bar. Ideally, there would be a few more to allow you to adjust the support bar for longer or shorter GPUs. If airflow and cooling is important in your setup, this rig is best with 6 or maybe 7 thinner GPUs spread apart or no more than 5 larger (thicker) GPUs. The finished product is much neater and compact than a hanging rig or anything similar.

This product has all the functionality and sturdy info you’d expect to house your rig. It’s bare bones but has enough included hardware and even a power switch included. The middle bracket that the pcie risers actually rest on has an adhesive foam strip included which is a very nice touch. My only gripe is a lack of clear instructions. The instruction “book” is just a sheet of paper with small pictures and few directions. If that was improved this product would be perfect.

Great frame for the price. I just needed something simple to mount some graphics cards to for a mining rig. The one thing I really like about this one is it had space for 2 power supplies. There are predrilled mounting holes and risers for the mother board, and there is a slot to mount your hard drive vertically. The fans mounted to the front perfectly, and the graphics card fit and seat well. It was exactly what I wanted and was expecting. Id highly recommend.

There is a middle gpu support bar that can not be used due to the risers on the gpu extend below the threashold when the gpu is secured on the rack. Also it would seem the threads are slightly out of spec probably due to powder coating. not a big deal but it also came -1 standoff... PIMA. Outside of all of that it works, metal is decently thick, and atm I feel that there is enough holes for custom mounting options...

This Rig is my first one and i must say i will be getting 2 more. easy to assemble , not too big and its strong. i wish they could stack on top of each other but i am satisfied

It was assembled in 15 minutes

Muy buena opción y ligero fácil de mover y su tornillería es buenaJusto lo que pedí a un que en la imagen se ve más grande de lo que en VDD es cumple con mis espectativas lo recomiendo mucho

I was pleasantly surprised at thickness of metal, as a lot of metal items on amazon are cheaply made rubbish. Easy to assemble and i modified mine so I could use a riser-less motherboard.

Was not expecting this case rack to be anything special but suprised and happy right now. Arrived next day as promised (Thanks Amazon) and included all the neccessary screws with spares and a very handy power button. Well made sturdy and no rough or sharp corners.True you could save some pennies and get yourself off to your local hardware store for some angular alluminium and have a go yourself but trust me by the time you do all that for the price this cost its a no brainer.Very happy BuyerThank You

Very easy to build, and to move GPUs around on. Not sure if I'd recommend running 12 GPUs on this as the gaps between the cards would be very very small and you'd run into heat issues unless they are low wattage cards.My one desire with the frame is that the clearance between the motherboard and the cards would be a few centimetres more. It's very fiddly and hard to reach under the move things like riser connectors as the gap is quite small.Overall the frame is super sturdy and holds the cards well, there's no risk of contact that I can see that would short the PC. Good value for money.