Argon Regulator Flowmeter Gas Gauge for Mig Tig Weld with Gas Welding Hose

Works very well as a replacement regulator for my Miller MIG welder. Easy to setup with the various supplied fittings that help connect this regulator to a variety of machines and applications. I now prefer the ball style gauge over dial style regulators. So far this regulator meets my needs and I have no negatives.

I'm not a pro welder. If you're looking for such opinions, skip mine. I'm a home-jobber, hobby-welder. I needed a flow meter to get my mig setup to do aluminum wire. This flow meter attached just fine to my argon bottle, no issues. The hose it came with is fine too. I detected no leaks once it was all snugged up (I just used soapy water spray). I have no way to test if the flow-rate I'm setting is accurate. I used settings I found on-line (~15 to 20 ft/min), did my aluminum migging and the parts were joined. My welds don't look great, but it worked... my destructive testing tells me the welds are at least as strong as the base metal (aluminum angle). What I could notice was I didn't get the ugly porosity that low/no shielding gas would show. So, as far as I know, the flow-meter is passing out enough gas to do the job. Maybe its too much?.. no idea. More may be a waste than 'the right amount', but the welds are cleaner than if it was too low. I tested the low/no shielding gas use-case just so I could see what it looks like... and its very ugly. Look online for pics/vids of bad shielding on aluminum welds... its unmistakable when you see it. Now, when I say 'ugly', I mean beyond the clumpy, uneven welds a home-jobber like me puts down... b/c my welds are 'ugly'. I don't stack dimes,... I may lay down a dime, then a quarter, then a nickel... repeatedly. Bad form, bad movement control, all the wrong stuff. So, what I mean is, the low-shielding-gas issues present as pits/pot-holes and dirty/dark spots in the weld... that would make even an otherwise pro-welder's nice 'dime-stack' look like a pitted, dusky looking mess. Once you've seen it, you know what to look for. Despite my good results, I'd say that any pro is not going to use or trust this 'cheap' meter, nor should they. If your welding is mission-critical and/or lives are on the line, use the good stuff... and any pro welder knows that anyway. If you're like me and just need to stick some metal together for small projects where if they fail no one dies?.. then perhaps this flow-meter is just fine for you as well.

Works great. Solid 50psi with adjustable flow. Had to change the tank fitting to match my bottle but overall great quality. Nice sight glass to adjust flow.

Worked fine for my argon tank. It’s definitely cheap but seems to do the job.

I recently used the RX WELD Argon Regulator Flow Meter for my welding projects, and it has been a game changer. The flow meter is incredibly accurate, which ensures a steady and consistent gas flow. This accuracy has noticeably improved the quality of my welds. Setting up the regulator was a breeze, and the included gas hose fit perfectly with my existing equipment. The build quality of the regulator is solid, giving me confidence in its durability over time. One thing I appreciated is how easy it is to read the gauge. The clear markings and sturdy construction make adjustments straightforward, even while wearing gloves. The regulator has maintained its performance without any issues, providing a reliable gas flow for all my MIG and TIG welding needs. The only minor downside is that the hose length could be a bit longer, but it’s a small trade-off considering the overall performance. For DIY enthusiasts and professional welders alike, this argon regulator is a fantastic addition to the toolkit.

I have a Hobart Handler 180 Mig Welder. I moved about 7 years ago and had to wait for a garage renovation with a new workshop before I could hook it up. I finally had a need to use it, to weld a broken frame on my ATV snowplow and I couldn't find the regulator. Somehow I lost it in the move or the 7-year waiting period. I ordered this one because it seemed to have everything I needed and looked like a better setup. I never really liked the original valve because it used a barb connector and hose clamp. I know the Argon gas is delivered at low pressure, it's non-flammable and non-explosive, and a clamp is sufficient, but I still didn't like it. I read reviews and saw several people claiming that you couldn't connect the hose to the regulator without cutting the end off and using the barb. Based on the pictures I couldn't see why that would be so I went ahead with the order. To all the people who can't get the hose connected, you are either missing a piece, got the wrong piece, or don't realize that you take the barb out of it's adapter and use the adapter to connect the hose. If you're reading this review then let me assure you, the hose connects to the regulator if you use the adapter correctly. The valve worked flawlessly for my snowplow project. I wish I could say the same for my welding skills. The 7 years of waiting didn't do my skills any favors.

go this item for the one on my snap on mig that started leaking .works as described and good price point

Fast shipping, excellent quality.