Wiha 75985 MicroBit Pocket Clip Set with Torx T3-T8 Micro, Magnetic Bit Holder and Aluminum Storage Handle, Multi, Оne Расk

Excelente calidad, trae las puntas necesarias para desarmar celulares nada que ver con muchos estuches tipo relojero. Sin duda de gran utilidad!

Excellent torx screwdriver. As soon as I received it, I tried to remove some torx screws that my other torx screwdrivers/bits couldn't budge. The Wiha removed them all, no problem. I haven't had it long, but it seems durable and well constructed The pen tip apparently has a magnet, that holds the bit firmly in place when you use it. The knurling allows you to get a good grip when using the pen to screw/unscrew the torx screws. The storage section easily holds all six bits. I just wish it came with T9 and T10 bits too since there is ample room in the handle. When removing the bits from the storage area, I noticed that 5 of the bits come out easily, but sometimes I have to shake the pen to get the last bit out. I suspect that the bit at the bottom is closest to the magnet and therefore the most strongly affected. But that's a picked nit. All in all, it's a great tool.

Haven't had a chance yet to use these bits .That said, I still believe after inspecting these and going by the quality of the set I have used from Wiha that they are more than acceptable and yes , I would recommend then to a friend. This bits seem well manufactured...nothing like the crap I've purchased from other companies. My opinion is if you can afford to buy Wiha tools then save yourself some major frustration and buy Wiha !

Product as described, Wiha are great quality

I emailed Wiha and asked which of their tools are made in Germany because I had seen poor reviews of some of their stuff made in Vietnam. Turns out anything on their website with the big round "Made in Germany" logo is, well, made in Germany, which means good steel, good build quality, good tolerances to their machining, good tools in general. So thurn out the pen part of this is not made in Germany, but the bits are made in Germany. I heard so many complaints about similar small Torx bits being twisted off on the first or second use. So far there has been not the slightest hint of such from the bits in this set, and I've used three or four of them extensively. The pen device is plenty good enough, too, you just have to give it a tap upside down to get all the bits out, because the bottom is magnetized. Just remember the bits are tiny in the Torx sizes from 10 and smaller, so even if the bit is fine steel the screw may be cheap iron or alloy. Don't put too much torque on them, and don't use a big T-handle because you can't limit the torque very well. If something does not loosen with moderate pressure, give it a shot of some liquid loosener and wait awhile; brake fluid is two bucks a half-pint and works as good as anything to loosen screws and bolts. Great bits, good enough pen holder, Wiha German quality where it counts.