SilverStone Technology Ultra Compact Mini-ITX Computer Case with Mesh Front Panel Black (SST-SG13B-USA)

I recommend this case if you build a Mini ITX. It fits a medium graphic card inside easy. Also can be fitted with a normal size power supply. The case has enough holes in it for the airflow.

Impressed with this case. Put a 3060ti in it and an i5 10400f. 3060ti runs cooler than I thought it would and same for the CPU. Nice and compact as well which was what I was going for. Easy to build into as well.

This is a pretty good and very compact mini-it case, love everything about it, except for 1 thing, its obviously intended for water cooled systems, this is because the way the case is made, your motherboard sits on the bottom and directly above it sits your power supply, that means very hot air blows directly into the bottom of your psu and the hot air scatters all over the place rather than directly up, its a clear airflow obstruction. This unfortunatly means it doesnt really matter where you put fans as that cpu heat gets blasted into your psu, i would have preferred a bit more case height if it meant the psu was on the bottom and the motherboard above, that would have been ideal. Because of this glaring issue, even if you have an SFX/SFF psu, and you use active/fan cooling then this case is far from ideal and your components WILL get hot with no clear or ideal intake/outtake fan configuration because your psu is simply just in the way of your cpu cooling. Ifg you have a water cooled system then this is very ideal and very compact indeed.

El case es de muy buen material, bien organizado, pero solo para motherboard ITX. Considera una fuente de poder de un largo máximo de 150mm o no cabra en el gabinete. Tarjetas de video largas tampoco cabran, checa en la página de silverstone el tamaño máximo. Finalmente el disipador de tu procesador tampoco puede ser muy alto considera uno compacto de Noctua o silverstone. Cómo verás son muchas restricciones pero si las cumples tendrás una PC super compacta, portátil y con mucho estilo. En mi caso definitivamente lo vale!

I love this case. Nice and compact but I would advise to 120 aio liquid cooling.

This is a very nice little case that fits my (very small) desk perfectly. I first built my system with an ATX PSU which works, but is tight and leaves you with a rats nest of wires inside the case. I then upgraded my power supply (it was too weak to support my new graphics card) and got a Corsair SF600. This SFX power supply is fully modular, has shorter and more flexible cables than my old ATX PSU, and comes with an ATX to SFX adapter which offsets the PSU upwards. I calculate that offset provides an extra 23mm of headroom for the CPU cooler for a total of 84mm. I'm not promoting Corsair. I only mention it because it comes with the ATX to SFX adapter included, and those adapters are very hard to find right now. My only complaints are pretty minor: thumbscrews on the back of the case and some kind of clip mechanism on the drive rack would make assembly/disassembly easier, and it really should have some air filters. The case is also designed to vent hot air out the top, which is annoying if you have people who are frequently setting things on top of your computer. Yes, I'd strongly recommend this case for a mini ITX desktop.

Es el mejor gabinete tipo cubo itx, las dimensiones son las necesarias para un espacio reducido, puedes tener una pc gamer pequeña y poderosa que corra todos los juegos en ultra a 1080p. es mas pequeño y barato que la competencia y le cabe lo mismo. PROS: -le cabe hasta una gtx970 sin problemas (evga, msi, pny, zotac o de referencia) gigabyte solo la version de 2 ventiladores, asus solo la turbo, la asus strix 970 no entra. graficas como 960 y similares entran perfectamente y sobra espacio, siempre y cuando no midan mas de 27cm, la 980 creo tambien cabe, siempre y cuando mida 27cm o menos (no probe con 980). -cabe un enfriamiento liquido de 120mm como el seidon 120, corsair H60, kraken x31. uno de 140mm cabe pero reduce mucho el espacio para la grafica. CONTRAS: -tiene poca ventilacion, con enfriamiento stock o disipador slim se puede agregar solo un ventilador de 120mm en el frontal, o 140mm limitando el espacio para la grafica. -no todas las fuentes de poder entran, hay que medir la profundidad de la fuente ya que algunas marcas son mas largas y si no son modulares no entrara bien todo el monton de cable. -es tedioso poner-quitar la tapa, ya que es una sola pueza que cubre los 3 lados, quizas fuera mejor que estuvieran independientes las tapas.

It’s a good case. But I think if u prefer more thumb screws, u can consider the NR200 by Cooler Master