Wall Protectors from Door Knobs 12PCS, Door Knob Wall Protector, Door Stoppers for Wall, Door Stoppers Wall Protector, Door Handle Stopper, Rubber Door Bumper

I got these so my cabinets don't slam and or make a loud noise when doing so. They make it quiet when shutting and haven't fallen off at all. I dont recommend these!

They do the job!

These 12.7mm X 3.5mm solid silicone bumpers/feet are the real deal in terms of adhesion, quality of materials, and careful packaging. My use was very specific. I needed an EXACT replacement for a missing rubber foot on my wife's 30+ year-old Pfaff sewing machine. Careful measurement revealed the exact dimensions and profile required. After investigating over a dozen different sources and reading literally, more than a hundred reviews, I finally settled on this product and vendor. I am not disappointed!Other material possibilities ran the gamut from vinyl, to urethane, to silicone, to "rubber" (of unknown origin) and, onto plastics of dubious pedigree and worse performance. The adhesive abilities ran from marginal, to temporary and even to, non-existent! Granted, I was primarily looking at 1-star reviews but disregarding the commentaries by obvious morons, this is the place to discover avoidable problems.Buying 64 "rubber feet" to replace one missing foot seemed to be an obvious case of over-kill but, considering that I would use 4 of them, and that a "visit" to my local sewing machine shop (if it still exists) would be impossible with the COVID-19 quarantine in force, I figured it would be preferable to cruising several home improvement centers and standing in line to rummage through their stock of availabilities.These "Adhesive Rubber Silicone Bumpers" sold by Furnimate Furniture Pads, arrived within 48 hours and proved to be everything I expected. They are dense but resilient, and are obviously fresh stock. They are labeled as "electronic" grade and are precisely cut and mounted on a high quality paper backing that easily releases the smooth adhesive.As with any adhesive, surface preparation and "activation" is the key to success. My Pfaff sewing machine base is coated with an impervious, smooth finish (probably a high temperature baked enamel or powder coating). I removed the existing, "German rubber" feet (which, by the way, were still "rubbery" and well-adhered) and thoroughly cleaned the "sockets" which the new feet were destined to occupy, using "Q-Tips" and lacquer thinner. I prefer lacquer thinner to other solvents because it contains Methyl Ethyl ketone, acetone, several alcohols and who-knows-what-all. Yep, it really dissolves everything, wicking it into the cotton tip and drying almost immediately. A second swipe with solvent and a fresh swab ensures a residue free and "activated" surface. Being careful not to touch the adhesive surface (I carefully teased each foot off of its releasable backing sheet with a miniature ice-pick I have made from a repurposed screwdriver), the freshly released foot/bumper is placed into its final position and pressure applied. That's it! Does it stick? Oh, yes!The sewing machine is happy and more importantly, so is my wife. That makes me happy too. And all thanks to this fine product and the folks at Furnimate Furniture Pads. Oh, and those 60 spare feet/bumpers ? They're going into my parts storage inventory. Come to think of it, I've got a few projects that can use some low profile, sturdy feet.

I have only had these for a few days. So far they are sticking to the doors and cabinets, but it is too early to tell if they will continue to do so. They DO reduce that hard, wood on wood, bang when the cabinet door closes. It is now more of a loud THUD. It is definitely less irritating than it was because that harsh bang is gone. I tried putting two stickers facing each other (one on cabinet door, one on cabinet). That made for a much quieter door closing. However the door did stick out a tiny bit because the double stickers increased the space between the door and the cabinet. I took off one star because it is not as quiet as I hoped it would be, but it IS a big improvement.

The clear bumpers lifted the turntable Plinth to keep the bottom plastic from scratching the surface.

I used these as numbers for the handle area of my double barn doors. Before these, my fingers would often get smashed between the handle and the opposite bypassing door. I installed these with the sticky side first, but they fell off. But, what I do love about these is there is a small enclave in the middle that is perfect to use a screw and attach them to the door. Now, they stay in place. I also love that these are clear, so it does not take away from the beauty of the doors. A great solution to my problem, as I am no longer getting my fingers smashed by the door momentum. The price is excellent. I have had these for about a month, and no deterioration occurring.

i bought these because my upper cabinet hits the wall and would damage the drywall. i just got these a week or so ago. the adhesive was and is fine so far. the only reason i gave it 4 stars instead of 5 is that i haven't had it long enough to give a long term review. but to be honest. its just a rubber bumper to protect the drywall. its exactly what it should be. but the company is very attentive and looks for feedback and seems very customer oriented ... but again. its been a week and its just a rubber bumper. it ain't rocket parts.

For the price, these are hard to beat. They are not "squishy" but soft enough to not damage anything that hits them. They are also strong enough to suspend something up by about 1/3 of an inch. I used some to prevent doorknobs from hitting walls, but I also used a couple to make a "platform" desk on top of my desk that my monitor goes on top of. I can slide papers and some thin items, underneath and my monitor is now at the right height. I'm not sure how much weight they can "hold" but my gut says it's a LOT.They feel really nice to the touch, definitely not cheap, and the adhesive seems incredibly tacky in an interesting way. It feels like you can stick and reposition them a few times as long as you don't press down too hard, but once you figure out exactly where it should be, press down hard and after a couple of hours they will be REALLY stuck there.

I brought this Adhesive Door Knob Bumper Pads to protect the wall from the Refrigerator's handles. Pretty good and does the job well. It's a transparent/clear colour to make them not obvious. The only dislike is one the adhesive came off even before us. But overall good buy for the price.

Used on the back of bed frame to keep it from scratching the paint off the wall, agree with other commentors that the native adhesive isnt the best on wood. Installed with a dab or superglue and allowed a 24 cure time, now super secure. Also great as padded foot on small furniture

Smaller than I thought they’d be, which is a plus. Very easy to install. Adhesion is not great, 2 of 3 have fallen off since initial install. The company seems great tho, they have already reached out to ask for feedback on the product—hopefully they have some input on the adhesion issue we are seeing.

I put the bumper pads on the wall to stop the handles on my kitchen cupboard from denting the wall. They work like a charm - they're a bit smaller than a dime, maybe about as thick as 2 coins (toonies), and clear so they don't stand out at all. The glue is quite strong, and there have been no issues with the bumpers falling off.

Super easy to install, you just peel and stick to wherever you want them. It stops the door from hitting holes into the wall without being noticeable. It's only been up for about a week, but it's really sticking to the wall. Very happy with my purchase and would purchase again!