ASUS ROG Bezel-Free Kit ABF01 Universal Multi-Monitor Setup with Optical Micro-structures Easy Assembly, CLEAR, (Set of 2)

These are super awesome. I love the effect they give on my racing simulator. The only issue I have is that my monitors are a bit too large so I need to purchase the adapter kit for 32 inch monitors. A bit pricey, but worth it in every aspect.

The media could not be loaded. they do work on curved monitors and you can get them to flawlessly mesh two screens together but the stock brackets are not that strong for holding the glass in place so i 3d printed clips to force them to grab the glass tighter and to get it to show no lines in the middle when using this only worked flawlessly because i 3d printed a monitor support for the bottom and back of the monitors to hold them perfectly together at the correct angle so i basically paid a hundred dollars for the glass lol which to me was worth it because the end result is what i wanted but if i didn't have a 3d printer for supports i would've returned them because its a pain trying to install it and get monitors to be perfectly together so splitting and warping effects don't show from them not being perfectly together and its probably my ocd talking about that but yeah, if you have a 3d printer the effect can be perfect for use on curved monitors that is but they do say that they’re made to be used on flat monitors so maybe that way they’re a-lot easier🤓🤘

Product came well packaged and was easy to assemble. You can see the before and after pictures here. The concept is amazing and really enhances the gaming experience with multiple monitors. I have one monitor with a slightly larger bezel than the other two even though they are the same model number and it made the mounting a little odd. I did not realize just how narrow the 120 degree mounting would make my monitors, it is a little claustrophobic also the side monitors are difficult to read text when set at this angle and you must set them a 120 degrees for the lenses to work properly. I prior to this purchase had them set at 140-150 degrees for optimal comfort. You should check your set-up and decide if you can live with that. The bottom mounts interfere with my on/off buttons on the center and left monitors. I think a better mount system would be adhered to the front of the center monitor only holding the lens at the correct angle and allow the side monitors to be swung into place. A set of protective sleeves for the lenses would also be helpful for when you do not want them on the monitors. Please don't misunderstand, I like them, you can see just how cool it is to remove the bezel from your vision.

Conclusion: Just buy an altra wide screen for yourself.Pros: 1. Fantastic idea on this product2. It does significantly eliminates the bezel (the reason you can see mine with some bezel left is total because of my fault. My triple monitor stand's arms are not long enough to make 130 degree of angle as indicated in the manual. Based on what I have here, I am sure it can fully eliminates the bezels)cons: 1.As you can see from my game play screen shot, although it some how reduce the bezel, it add two large strips of dark area which cannot be ignored. This is the main reason why I cannot recommand this product to anybody.2. THIS ONLY WORKS ON FLAT SURFACE! Note they works fine with curved monitor. What I mean is that the monitors must have a flat back and no pop up bottom. The 3 monitors I am using are optix mag214c from msi. They have a round back and the front bottom is poped out. As a result, you may can tell that the center part of the bezel is wider than the top and bottom part. Just keep this in mind, check you monitor's compatibility first!Eventually, you have to choose between whether you want to see the bezels, or you want to see two huge chunks of dark zone on your screen.

I use these with a triple 27" display setup for sim racing, it is SHOCKING how well they work. Yes, you can see a slight distortion at the edges of the strips but it completely and totally hides/removes the monitor bezels, when setup properly it really is like magic how it removes them and makes the setup feel like one giant monitor.I did modify mine by cutting them down to the exact high/length I needed (I think they support up to 32" display) and created custom 3D printed mounts for them as the included mounts are rather large. They work fine but add noticeable bulk at the top/bottom of the monitors hurting the illusion of one large display so I just made my own small mounts and used some mounting tape to hold them on.