20M LC to LC Fiber Patch Cable, Single Mode SFP Fiber Jumper, Duplex LC-LC 9/125um, LSZH, 66ft, for 1G/10G SMF SFP Transceiver, Router, Networks and More

These fiber patch cables are affordable and work well.

Worked perfectly for what it is. Connects older SC based fiber to newer LC based SFP's, etc. Used this for a SC fiber patch panel handoff that's been in place for over a decade.Does what it's supposed to do, no muss...no fuss. Great product!

Good low-cost fiber patch cable. No issues or concerns. I would buy again.LC to LC, 1 meter duplex. Om3. I used for a short 10g sr connection. The cable appears to be just as good as other brands used in data center environments.

As described & quick delivery.

Got 2 SFP+ modules and fiber cable as a bundle for less than a single SFP+ module from most places. Connected without issue to a mellanox 10gb card and a Qnap switch. I have a second hand brocade switch on the way, it will be interesting to see if these work with that as well.

As promised...

Replaced an old copper line on a 90' underground 3/4" conduit run to an antenna tower. The pipe had water and some mud in it so I was nervous about how well this would pull through. Pulled the old line out and pulled a new fish/pull string. I also needed to pull a copper power line to power the fiber converter, but with the size of the end of the fiber optic cable, I could not pull the coper first. Using the fiber to start the pull and then attaching the 18/6 copper made me very nervous, but once the pull was done and I hooked everything up, I had a great data connection through the fiber. Very happy with how well this fiber cable pulled with the extra load of the copper, and how well it worked to transfer data.

Connected from a 10GBps card to my Juniper EX3300 with some cheap transceivers from eBay. Got 10GBps (more or less).