Automatic Wire Stripper Machine, 180W Electric Wire Stripping Machine for Copper Wires, 0.06"-1" 60 ft/min with Visible Stripping Depth Reference Recycling Scrap Motorized Wire Stripper Tool

Excellent help to save time at work. Thanks to this wonderful machine I can invest my time in other things and earn more money.

This actually works very well is nice and heavy does not feel cheap at all. Used it to strip A lot of big gauge wire works very well Also works well with Little guage wire It’s all in the adjustment. Definitely recommend.

First, it's a great machine. Saves so much time. What I got done in 5+ hours (off and on) probably would've taken 2-3 days, manually and a lot of blades.That being said....smaller wire (10g and below) is the biggest nuisance. Constantly slips out the middle of the rolling gears and shifts to the side of the blade. Spent 45 minutes adjusting the plates and/or the adjusting knob, and worked 30% of the time.Bigger wire (8g and up), works amazingly. I did it all the way up to 500s (Pictures are mostly 500s, 2/0, and 8g).

The media could not be loaded. I bought this because as an industrial electrician I had a lot of wire I had accumulated from various jobs. This thing will pay for itself quickly. To put it in perspective, I trimmed wires for 3 days (about 12 hours total) by hand and I managed to trim 24 pounds of 2 awg thhn wire. This thing trimmed over 75lbs in just a little over three hours and I did it while watching tv and that is including unboxing and setting it up. One thing I will say is read all the instructions. I did not move the wheel in so the wire wanted to roll and not cut down the middle. Operator error. Had it not been for that I believe the time would’ve been less but regardless I was able to trim a 100lbs of wire and my hands don’t hurt. Beats the heck out of doing it with a razor blade or knife. If you have big wire or even small wire and you are wanting to trim it to get the most buck for your copper buy this machine! My only complaint is I wish the manufacturer would just use thumb screws instead of hex cap (Allen head) bolts as this would’ve made changing the plates for bigger wire easier. However the machine comes with the proper Allen wrenches to make the necessary adjustments. I hope it last a long time. I feel like it should as it feels very durable.

This wire stripper is amazing as long as you do test cuts and batch feed similar gauge wire once it’s set up. Stripped wire sells for $5 a pound on EBay.!!

Muy buena máquina

Easy to use and very well built.

This will strip insulation off of some (but not all) wire. It does adjust for different sizes of wire; but, even once it's adjusted it wouldn't completely cut all the way through all of the insulation. Very disappointing. Returned the product.