PWM Fan Splitter Adapter Cable Sleeved Braided Y Splitter Computer PC 4 Pin Fan Extension Power Cable 1 to 3 Converter 10 inches (2 Pack)

Used this to power 3 case fans from a single header on the mobo. Did not need a 2 pack but was priced low enough that this was not an issue. The cable seems to be made well enough for what it is intended for. Each connector worked well. Once connected there is not too much strain on it so I do not expect any issue with them loosening or general cable durability.

**UPDATE**I received a refund immediately, so I’m changing my rating to 5!I got these a while back in preparation for when I buy extra case fans. The time finally came and they work exactly how they should! They’re PWM so I can adjust each of the fans connected, although I can only adjust all of them to run at the same speeds (that could just be me since I’m plugging this into a single fan header on a Corsair Commander Pro). But that doesn’t matter because I want them to run at the same speed anyway!I do have an issue though, and it’s that one of the splitters came with loose pins or something. Because when I plugged three fans into each end, one of the connections were loose, thus not allowing my fan to spin. I know this for a fact because if I pinch the connectors together, the fan will start to spin. But then I release them and the fan stops. Since this came with two splitters, I just swapped it out for the other and it works, but it sucks that one isn’t working. Hopefully I can get some sort of replacement, and if I do, i’ll update my review to 5 stars :)

TeamProfitcom PWM Fan Splitter Adapter Cable - I was helping my nephew build a pc on a budget. I had some spare 3 pin fans and his case came with a couple 3 pin fans. We used these to connect 3 of them to the same 4 pin fan header. Connecting them was straight forward even going from 3 to 4 pins and everything worked fine.

I was buildng up a PC with some old parts I had lying around and the mobo only had a CPU and Chasis header for fans. These worked so that I could easily, and cheaply, have 5 fans connected to PWM headers.Some of the pins were bent, actually most of connectors had one or more bent pins that I had to straighten out to get everything to fit. Not a big deal fir me. They could be a few inches longer, but it worked for my mid tower ATX (P300A). Look to be made well other than these caveats.

I bought these awhile back. In fact I actually bought a second one in January as well and these are fantastic. I have Be Quiet and Noctua fans setup in my PC, all PWM 4 pin fans mind you. A total of 10 fans including the two CPU fans on my D15 Noctua cooler. A bit overkill but I want good neutral airflow going in and out of my case and being silent at the same time. I have a Fractal Define R6 case and it does come with a fan hub running by sata power in the case. The hub has up to three 4 pin PWM and four 3 pin DC fans, and me with 10 what I do I do. So I slapped one fan in back for exhaust running on the motherboard header. The two CPU fans I tied into the Noctua splitter that goes into the fan hub, then my three fans on top I connect with the splitter. My fans intaking front I also use the second splitter and my fan on the bottom intaking connects via the fan hub as Be Quiet fans give you more than enough length to connect to anything in your PC. I'll likely buy more when I decide to do a custom loop one day for push/pull radiator setups. And the best part? Inexpensive and the sleeving on the fans are really good quality. No complaints here!

Good, cheap 3-way fan splitter. Bought these since you get 2 for the price of 1 of other models. Nicely sleeved cables which look good too. Note, only 1 of the 3 extensions is 4-pin, so the speed reported will be off that 1 connection, the other 2 will match it. I have 3 identical fans off this, so not a problem. Also consider your fan power draw. Most motherboard fan headers can supply up to 1A, and most typical 120/140mm fans are 0.3A each (0.9A total). So it's not a common problem, but if you have some special high-power fans, be warned, but that's not a limitation of this cable.

I don't have enough headers on my motherboard to connect all my fans so this was a great solution to get them all working. As a disclaimer my fans are not RGB and you should keep that in mind as RGB fans pull more wattage so connecting all three would likely damage your components. Otherwise I recommend this!

As I was building a new monster PC for myself the other day, I suddenly realized (but should have known that ELEVEN case fans might need fan splitters to do my build right) that I was going to need splitters of some kind to be able to aesthetically complete this machine in the best way possible. I ordered these, never having ordered splitters in my life, and I love them. The quality is amazing, they have just the right flexibility yet hold a straight line, and were a very good investment. I've got THREE installed now, but decided to 'hot-wire' the last TWO case fans since they were off all by themselves in relation to the others, making the use of a splitter very difficult. I will definitely be buying all of my future splitters and cables from these guys!