Cowles Custom - Premium Universal Body Molding for All Vehicle - Easy Install, Chrome Finish, 1/8" by 20 feet, UV Protected, Long Lasting Flexible PVC

Make sure your car is nice and clean.Unroll it and let it sit in the sun, or put weights on the ends over night to get it nice and flat.I wiped down the car with isopropyl alcohol where the trim would be then used window cleaner to give it the best chance to adhere to the paint. I also bought a small roll of 3m trim tape for the ends of the trim since the factory strips are only on the top and bottom.I used magnets (pictured) to help line up the trim on the car so it came out as straight as possible then peeled back the adhesive covers as I went instead of taking all of it off and fighting it.It's been on the car for a week so far and no issues.I used a white paint pen to transfer the factory shape to the new trim, then cut it out with utility scissors, a Dremel tool, and a hobby knife set to carefully get the final shape.I then used the isopropyl alcohol to clean off the white paint pen marks before putting it on the car.

I purchased this "chrome" trim to replace some I installed years ago on my motorcycle and was losing its adhesion. My previous trim was similar but was a V shape in section, to wrap around the edges of my fenders. This trim is much better, is just a flat trim rather than the V shape. It was very easy to install. I clean up of the fenders with rubbing alcohol and doing the installation during warm weather also helped. Very flexible and followed the contours of my fenders beautifully. Very happy.

Easy to install. Great price. Makes my side vents look like factory. Will buy again for sure.

I bought this body side molding for two purposes: (1) Give my car a sportier look, and (2) protect my doors from minor door dings. It seems to be doing both. Installation was easy and after a month or so the adhesive is holding up well. I gave it a four-star rating because it is a bit pricy and we have not experienced extreme cold or hot weather yet. If it holds up well after a year or two, it certainly deserves a five-star rating.

This company who makes this trim molding is the best. Don't buy the other off the wall brands.

Just what needed

The media could not be loaded. The chrome itself looks really good. It looks like a factory style chrome that the vehicle would’ve come with. My only complaint is that the adhesive itself can’t withstand temperatures here in South Texas apparently. Even after prepping the surface correctly, make sure everything was clean. Make sure it’s taped down since it was curved towards the end of the chrome run, It only held up on that curve for about a week and a half then again this is Texas it gets over 100° so maybe the temperature is a factor but now I have to figure out how I’m gonna re-tack those corners down the actual straight run is fine. Makes me wonder what the difference between this and the ones from Temu or AliExpress are, I went with this, since it was namebrand.

Outstanding quality, great adhesion, looks great, absolutely no problems