ISSYAUTOFull Size Truck Bed Cargo Box Organizer for Pickup, Waterproof Truck Bed Cargo Bag, Storage Organizer Carrier Accessories for Groceries, Golf, Easily Slide in and Out, Easy Access

Here's the most helpful thing I can write about installation:Get a large area to build this. I used my tailgate on my trunk, just don't drop any parts (I use ramekins to hold all the nuts and bolts). You can also use a large foldable table, or a dining room table for example.Tools: an allen wrench is all I needed. If desired, a drill or impact with allen head attachment can make things fast and really tight.Clips: Straight across, 90 degree corners, two "hinged" clips that go on the front side of finished frame where the user would open it, and a handful of perpendicular clips that attach from a horizontal part of the frame to a vertical part of the frame.Group all the bars of equal length together. Be careful on some of the shorter bars, several are different only by a handful of millimeters. Use the sheet of instructions to build the top and bottom perimeter frames using the long bars and one of the medium short bars as the sides. For the clips, I would always use the threaded nut to face inwards, and the allen head bolt to face outwards to make it easier to tighten everything. I recommend never fully tightening until the entire frame is assembled (except for four corner clips on bottom and top frames; you can safely tighten those up ASAP to make it easier to pick up both frames).The outside perimeter is identical on both top and bottom frames but the bottom frame has two cross bars to add rigidity. To place the those at the correct distance, use the padded bottom (3 large squares of padding, with roughly a 1" gap or so between each pad) laid out to know where the cross bars should lay. Next place the vertical bars on the bottom frame using the clips. I found it helpful to use the top frame placed at an angle on the bottom frame, while the bottom frame had the vertical supports already installed, as I placed the clips on the top frame and dropped down onto the bottom frame's vertical clips.Once the entire frame is assembled it's a slam dunk to tighten everything up and place the bag around it and velcro into place.All-in-all, I hated the assembly. By the time I understood it, I was two hours into it and the paper instructions are largely useless. However it seems sturdy, and really seems to me to be the perfect option for a full-size pickup-truck to have a space for groceries or bulk runs to costco. I'm a huge fan of it for items at wholesale clubs. I've tried the cargo nets but really only felt like they worked to hold small items that fit in there, nothing really worked for larger items that would slide back and forth in the bed of the truck.

The devil made this I'm sure the instructions is a joke the video helpedWith that being said a 6 pack later it is finished. And it's good quality it rained and my test paper was dry fit in my 2025 dodge ram crew cab perfectly I'm happy with it .would have given 5 stars but the instructions fell short.

Thanks to others who wrote detailed reviews. The video was aLeo extremely helpful. Following the instructions and separating the poles by size contributed to a straightforward and easy assembly. Separating the elbows and joints also streamlined the process.The final product is sturdy and beautiful. It will definitely be functional inside the bed of my 2022 Chevy Silverado LTZ.The entire assembly took me roughly 2 hours and 20 minutes. However, I could have finished a lot sooner had I not started at 1:15am. I had to operate quietly and not drop the metal pieces or use my drill after my wife had fallen asleep. Otherwise, I would have probably completed the assembly in under two hours.I put mine together on the bed. The only part I had a little difficulty with was swivel joint B, which is part 10 on the right side vertical pipe. However, I moved the frame to the floor and slightly loosened swivel joint A, which is part 9. The part slid down a little and went into place. I was able to attach part 10 and retighten the entire side. I would therefore advise to assemble on either a large enough table or the floor with knee pads or a pillow for comfort and protection, or your truck bed.Everything else was easy and straightforward. The Velcro is strong; hopefully it will remain strong. I cannot wait to put it inside my truck in the morning. I had extra screws and nuts remaining. I also had one extra elbow and swivel of each type, which I will save.Although this is a one person task, assembly would be much faster and easier with two people. I would absolutely recommend this product. Do not be discouraged by some reviews that suggest assembly is a difficult task. I hate putting anything together. This is rather easy. Simply separate the pieces into individual groups, use the video, and read the instructions. You’ll be just fine.

I really wanted this and was excited to be able to use it. The quality was fine for my purposes and the ad claimed it would fit my truck. - a standard Chevy Silverado. The assembly was difficult but I thought it would be worth it. But, when I got it all together, it did not fit. I could get it in and out of the bed with help but it was too tight to be able to pull it onto the tailgate as advertised. And that was the whole point. There was no way that could happen. I sent it back.