INJORAHard Plastic 12.3 Inch/313mm Wheelbase Cherokee Body Car Shell for 1/10 RC Crawler Axial SCX10 & SCX10 II 90046 90047 TRX4 Kit（White）

My review is based on me reading every review available on Amazon for this body before I ordered it. I took every review, the good and bad to heart before giving it a shot.The body comes fresh off the sprues, unpainted and raw but well packaged and overall a great overall finish. Light buckets/lenses and scale details I/E door handles/mirrors etc on sprues. Sprue clip locations are mostly hidden spots once attached so very minimal sanding and flash removal were needed.I saw alot of complaints about the windows being fragile, which could have some merit depending on how you glue them to the body but the windows themselves are thick and made out of some kind of clear acrylic. If you were to break one of these windows completely it would be in the kind of crash where the windows would be the least amount of worry. They are not flexible clear lexan but they are thick, scale realism replicas. Good clarity and paint/stainability.The body: I would give the body a 9/10 as far as realism goes, it has the older style grill and some heat ducts in the hood that do not do it for me but otherwise still look great, some lines in the roof that look like it might have been made from a recycled die but again..looks great overall.The light buckets and lenses included in the body are amazing and there are plenty of mounting holes for 3/5mm Leds available from any RC hobby store/universal 5-12v LEDs.Body mounts: the body I ordered specified SCX10 compatibility but I was mounting it to an SCX10 ii cherokee edition. The factory bumper on the SCX10 ii was an exact match to my real life cherokee bumper so I did not use the included bumper so i had to fab up a custom rear mount but the front fit perfectly and the rear would have had I just used the included factory bumper.My only complaint was the fender flares, they look great but the fact that they are rubber vs plastic is the amount of prep needed to get paint to stick if you didn't want blacked out fender flares.The paint: You want to paint this thing? Treat it like a real car paint job. Prep sand everything, take the time. Get some Tamiya fine surface primer, let it dry and wet sand. Use automotive grade spray cans from any parts store/taniya paint and for the love of all things RC, take the time to clear coat. Increases the durability of the paint times 1000. Lastly, get some headlight/tail light peelable tint and spray the inside of the windows, unless you want to show off the interior. Which is decent, but is the only part that lacks in my opinion.All in all, this is one of the better solid RC bodies out there and I highly recommend this manufacturer.

Very impressed with this kit. It was exactly what I was looking for. My only suggestion is that if you do not have prior experience building styrene models, you may have some issue. I’ve read some of the other reviews, and not knocking some of the negative ones, but I feel they may have lacked this. Otherwise, this went together smoothly for me. I used ShooGoo to adhere the parts that needed gluing. I have used this stuff for years in the R/C hobby, and regular modeling. It’s extremely tacky, dries clear, and remains somewhat flexible. It sort of welds the plastic together too. I was not missing any hardware, and the mounts worked perfectly for my OG SCX10. I love the scale looks, and the light holes were perfect. Took about an hour to assemble, and about half a day to paint up. I assembled entirely before painting. I just masked off the different sections. I am going to buy the Comanche for another project. Very, very happy. See attached pics.P.S. I rolled it over a few times, and it held up well. With that said, this pro isn’t the best option for hardcore crawling, stick with lexan for the big rocks unless you really aren’t too concerned.

Great product, lots of pieces. Scale realism is very nice, strong/durable material. If you are mounting this body to the TRX4 you will need to trim the inner fenders for the body to fit. Great product, just don’t be overwhelmed when you see all the pieces and hardware, worth it.

Bought this for my remo hobby 1093(axial honcho clone) and it looks awesome. The attention to detail and quality are nice and it's held up to some good bumps and roll overs so far. Word of advice, grab a tube of shoe goo, way better than any super glue and will hold windows, lights and mirrors in place forever. Everything else is held together by screws so no issues there.

I got this with marginal expectations. It was way nicer than I thought it would be. The body pieces are cleanly formed and surfaces much more even than some other bodies I've seen. Finishing work was simple and just a very light sanding was required.The sprue was cut off cleanly by the manufacturer and the body needed very little trimming in those areas, i could have gotten away with not cleaning it up at all if I wanted to. All the body panels were true and straight and the body fit together much better than i had hoped. I would have preferred a better assembly design, but i can't really complain as the screws seem to be of alright quality and the panels are flat enough at the seams a small dab of CA glue should help hold things.The clear pieces are clear, sounds stupid, but it's important. They were formed well on a clean mold and not burnt.The two negatives are minor but important. The stock mounting is crap. I didn't plan to use it, but it's worth noting for those who are. It's serviceable but not great. Secondly the roof is not an xj roof. I'm assuming it's borrowed from a JK or other hard body. Not a deal breaker for me as it's getting a roof rack, but some may be disheartened by it. Or, you can go my route and make or buy a roof rack.Overall, I've seen better bodies. Not for this price though. If you want to give the hard body thing a shot you can't go wrong with this kit. Just take your time finishing it.

with some modifications mounting wise this body will work on the gen 8 v2 red cat

Wheel base was to short. Looks sweet tho

Well built. Just wish the doors and at least the hood could open. As well as the window trim painted and a far better interior. Interior sucks. Other than that its a great body and looks better with lights hooked up. Assembly was simple and painless.