ANCLLO Motorcycle Car Clutch Brake Bleeder Hose One Way Valve Tube Bleeding Tool Kit

as described,does the job

Works well enough.Would be better if the tubing was longer.Not sure if the none return valve actually works.OK for bleeding motorcycle brakes as the technique isn't the same as a car.

I have a number of different systems for brake bleeding, a pressure system and a vacuum system. This little tool is by far the best system I have ever used. So much cleaner and quicker. HINT! Use a very long hose, and keep the catch bottle next to you in the car (obviously taking sensible precautions). You can then keep an eye on the number of air bubbles and colour of the liquid coming out. Then pump your pedal about 10-15 times, and top up The Master cylinder, and obviously repeat until everything is clear and Air free. I was shocked and pleasantly surprised at how much air and dirty fluid came out of my system, having just bled it a few weeks ago using my pressure system. I’ll never use anything else from now on.

Spring on the internal ball valve needs to be smaller to be able to flow fluid through, I had to cut 3-4 coils off to make it work more efficiently, once you can just about blow air through the valve you should be good to go.Update:Waste of time, the tube for the 1 way valve is way too small to fit over the nipple of a cars calliper bleed valve, bin the valve and thin tube and use the thicker tube with a container and you're onto a winner!

Updated Visibleed ,with a better alloy valve as opposed to a simple rubber seal over a hole , BUT valve is to strong either cut the spring inside or open the valve a few threads .Could do with longer pipes as standard with both sides the same diam. Smaller diam pipe is for motorcycle use .If they put these simple issues right its a good buy and should last forever , unlike visibleed .Longer right diam pipes with its own bottle and a softer valve and it would be ideal for home use .A pressure bleeder that looks the same as a Sealey can be had for 20/30 pounds now anyway

Worked a treat bleeding my car brakes, the pipe is a little short though so I ordered 1m of the 5mm bore silicon pipe, then I could place the collection jar where I could see it and pump away from the drivers seat. Tip, before you undo the bleed nipple put a blob of grease around the base of it so air will not be drawn down the threads. Then after bleeding undo the valve and flush it with wd40 or diesel before you store it away, there is a spring and a ball in there.

Make sure you clean and WD 40 it after use

It's ok