Ocean: Non-Contact Water/Liquid Level Sensor Compatible with Arduino, Raspberry Pi and Other Motherboards. for Industrial Production, Aquarium, Chemical Liquid, Agriculture, Gardening, etc.

Ocean: Non-Contact Water/Liquid Level Sensor Compatible with Arduino, Raspberry Pi and Other Motherboards. for Industrial Production, Aquarium, Chemical Liquid, Agriculture, Gardening, etc.

Q: To clarify, the theoretical dialectic capacitance of distilled water is 0.348 nF. The air gap dialectic capacitance of the electrode is unknown?

Hello! Regarding the "electrode air gap dialectical capacitance" you mentioned, it is not included in our product production technical indicators, so we are very sorry that we cannot answer this question for you.

Q: Will it read through black plastic waist water tank on trailer

Hi! It can read through the outer wall of non-metallic containers with a thickness of less than 13 mm. If the wall thickness of the black plastic waste tank on your trailer exceeds 13 mm, it is likely to be unreadable. The following is the Wiki of this product for reference: http://www.cqrobot.wiki/index.php/Non-Contact_Water/Liquid_Level_Sensor_SKU:_CQRSENYW001

Q: Will this work on the outside of a curved 15 gallon hdpe water reservoir? i have some of thhe optical sensor but want to switch containers.

Hello! Just make sure that its outer wall meets the requirements for use. You can refer to the following wiki for this product: http://www.cqrobot.wiki/index.php/Non-Contact_Water/Liquid_Level_Sensor_SKU:_CQRSENYW001

Q: Can I extend the wires? Is it better to lengthen wires between sensor cb and rPi or sensor cb and sensor?

Hello! If you need to extend the wire, it is recommended to lengthen the wire between the sensor cb and RPi so that the sensing sensitivity of the sensor is not affected too much.

4.5/5

产品编号: 313857544

安全交易

细节

Brand
CQRobot
Material
Acrylonitrile
Item weight
0.05 Kilograms
Style
Non-Contact
Maximum supply voltage
5 Volts (DC)

⚡Dual voltage output (3.3V/5V)

📏12mm sensing distance

🔧Plug & play with Arduino & Raspberry Pi

经常一起购买

CQRobot Non-Contact Water/Liquid Level Sensor Compatible with Arduino, Raspberry Pi and Other Motherboards. for Industrial Production, Aquarium, Chemical Solution, Agriculture, Gardening, etc.

CQRobot TDS (Total Dissolved Solids) Meter Sensor Compatible with Raspberry Pi/Arduino Board. for Liquid Quality Analysis Teaching, Scientific Research, Laboratory, Online Analysis, etc.

ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Ribbon Cables Kit Compatible with Arduino Projects

描述

🌊 Level up your liquid sensing game—contactless, precise, and ready for any challenge!

ADAPTIVE VOLTAGE OUTPUT - Easily switch between 3.3V and 5V output via DIP switch for seamless integration with your favorite microcontrollers.
ROBUST SIGNAL PROCESSING - Advanced chip tech filters out electromagnetic and power frequency interference for ultra-stable, reliable readings.
PRECISION NON CONTACT SENSING - Detect liquid levels through plastic, glass, and ceramic with up to 12mm penetration—no container modifications needed.
VERSATILE LIQUID COMPATIBILITY - Safely monitor toxic chemicals, strong acids, alkalis, and even powders without sensor contamination or damage.
EFFORTLESS INSTALLATION INTEGRATION - Lightweight (50g) and compact design ensures quick setup in industrial, agricultural, or aquarium environments—get your project live faster.

The CQRobot Ocean Non-Contact Water/Liquid Level Sensor offers high-sensitivity, interference-resistant detection of liquid levels through non-metallic containers up to 12mm thick. Compatible with Arduino, Raspberry Pi, and other motherboards, it supports dual voltage outputs (3.3V/5V) and is ideal for industrial, agricultural, aquarium, and chemical applications requiring safe, non-invasive liquid monitoring.

规格

Brand	CQRobot
Package Dimensions	10.21 x 7.49 x 2.21 cm; 50 g
Item model number	CQRSENYW001
Manufacturer	CQRobot
Series	CQRobot
Color	Non-Contact
Are Batteries Included	No
Item Weight	50 g

To clarify, the theoretical dialectic capacitance of distilled water is 0.348 nF. The air gap dialectic capacitance of the electrode is unknown?

Will it read through black plastic waist water tank on trailer

Will this work on the outside of a curved 15 gallon hdpe water reservoir? i have some of thhe optical sensor but want to switch containers.

Can I extend the wires? Is it better to lengthen wires between sensor cb and rPi or sensor cb and sensor?

常见问题

TrustPilot

TrustScore 4.5 | 7,300多个评论

Meera L.

交易顺利，产品完好无损地到达。

3 周前

拉维·S。

我很喜欢这里提供的多种产品。一定会再次光顾。

2 个月前

查看所有TrustPiLot评论

全球购物，通过 Desertcart 享受优惠

物有所值

各种产品的价格具有竞争力

全球购物

为 200 多个国家/地区的 3 亿多购物者提供服务

增强保护

深受全球购物者喜爱的值得信赖的支付方式

客户保证

深受全球购物者喜爱的值得信赖的支付方式。

沙漠车应用程序

随时随地随时随地购物。

S$66

关税和税费包括

SINGAPORE店铺

免费退货

30天对于 PRO 会员用户

15天无会员资格

安全交易

TrustPilot

TrustScore 4.5 | 7,300多个评论

哈立德 Z.

从订购到送货的体验都很棒。强烈推荐！

1 周前

苏雷什· K.

质量和快速送货让我印象深刻。会再次来这里购物。

4天前

查看所有TrustPiLot评论

关于我们

客户服务

客户支持

区域访问

法律与政策

社会的

获取应用程序

Ocean: Non-Contact Water/Liquid Level Sensor Compatible with Arduino, Raspberry Pi and Other Motherboards. for Industrial Production, Aquarium, Chemical Liquid, Agriculture, Gardening, etc.

细节

描述

规格

常见问题