Anbull Portable Band Saw with Upgraded Removable Alloy Steel Base, 45°-90° Metal Cutting, 10A 1100W Motor, 5-inch Deep Cut, with .020-by-44-7/8-Inch 14 TPI Saw Blade and Led Spotlight

Good stuff. I had a Jet auto oiled metal saw and this works just as well for smaller stock, likely larger stuff too. Haven’t tried big stuff yet but will probably be fine….just a matter of how much it can handle. Time will tell. Also I had to cut off the angle adjustment handle as it was in the way of the stock material when locked in. Nbd it cuts straight and doesn’t tip over or anything stupid. No case but whatever.

Love it. Good quality. Very useful

I have only set this up and used it once. But I was able to cut a 1/8 aluminum bar 3 inches wide and it cut quickly and I was able to set up the mitre angle precisely. The cam lock hold down is adequate for small light pieces, but the knurling on the shaft looks like to me it will not last long. It would have been so much better if they would have used a screw jack. The blade was a high quality bimetal blade. But overall, it seems like if you are a hobbyist this will work fine. I had no trouble installing the blade and it ran true, but again, I have only used this once!. I would not recommend this for a professional business.

Fast shipping. Nice product. I'll be using quite a bit.

I bought this saw for DIY projects in my garage. Mostly cutting 1 to 2 inch angle iron. The quality exceeds my expectations for the price I paid. 1 tip. Use tapping oil on the blade while cutting steel will extend its life. I recommend buying this saw.

Very nice

Took a chance with this item but I got what I paid for. Purchased 2years ago for light hobby metalwork cutting mainly 2" angle and tubing. Saw probably worked half hour total in its lifetime then failed. Sent to 2 repair shops to confirm a burnt armature. Contacted supplier to purchase either a replacement armature or motor. They replied saying no to both. This saw was very accurate on the base and worked like a charm when it did, hence my desire to repair it and keep it going. Sadly how quickly it turned to junk and such a waste of resources.

The media could not be loaded. Bought this saw over a year ago and it's been good to me up until recently. I don't use it but once every month or two but when I do, it's for a repetitious cut in large quantities for a product we manufacture. Overall it's a great saw for the price. There's complaints about accuracy and straight cuts. It is a little difficult to get it "true" but once you do it stays that way until you change it. I've made thousands of short interval cuts with it until recently when I was about done with a major job where I made over 400 cuts it started grinding and locked up. I contacted the seller and asked what the warranty was (They were quick to respond!). I didn't get a definite answer to the warranty but it's been over a year so I wasn't expecting it to still be returnable, instead he asked if I knew what part went out in it and suggested I open it and send pictures. So I removed the front end (Gearbox), took a peek and was pleased to find that it was just the motor bearing that had gone out, no stripped gears and no damage to the motor shaft worm drive. I sent pictures with a description of what I found and he sent me a link to the bearings (I'll add that link at the end) that were super cheap (10 pack for $7.77, They came in 2 days). While I was waiting I sifted through the grease in the gearbox to make sure no ball-bearings fell into that side, and I carefully pried what was left of the old bearing off the motor shaft and inside the housing. When the new bearings arrived I put one on and carefully tapped it in place, I used a sleeve the same size as the center of the bearing to make sure I didn't damage it, and added a little bit more bearing grease to the gears before putting it back together. Needless to say it was a super easy repair job and am very happy with the support I received. Most manufacturers wouldn't go as far as helping you fix your product. I made about 100 more cuts with it after the bearing replacement and it works like new again! Thank you for your awesome support and getting us back in business!Bearings:https://www.amazon.com/dp/B07XVPGMXQ?psc=1&ref=ppx_yo2ov_dt_b_product_details