Double Head Sheet Nibbler Metal Cutter by FUJIWARA, Drill Attachment Metal Nibbler Tool Kit with Wrench and Extra Nibbler Parts (8 Pcs Set, Iron Tool Box) (8Pcs Set)

The media could not be loaded. Just finished cutting out 4 new window openings in my LWB van. Was amazing. Cut through no problem on both my battery and 240V drills. Much neater, but slightly messier, job than a jigsaw. Great product, also comes with spares in the box so will last you a while.

Used this to cut out rusted metal from an old car. Works very well and much safer than using an angle grinder. Sometimes you just got to get the right angle for it to start cutting.

Thought about buying a dedicated powered nibbler but in the end decided to buy this for £30 instead and use it with a power drill. I thought I'd first give it a go with 2mm mild steel sheet, (the spec says the max thickness is 1.8mm), and it went through it quite easily.It does produce annoying little swarf nibbles which have to be swept up but in fairness they all do that.All in all very pleased with it and glad I didnt spend hundreds on a power nibbler for the amount it will get used.

Great bit of kit, was skeptical that this would do the job, but took minutes only to cut through the panels on my Transit van in order to fit aftermarket windows. It won't cut the supporting struts / thicker panels but for most of the work on the Transit it was both neat and created no burrs, which sped up fitting no end.

bought for a sepfic job and works well enough we are short the guidance arm in the packet but it still works well enough

Just used on site to cut a 150mm diameter hole in 1.5mm galv steel worked perfectlyThere are a good set of spares in kit .Don’t know how long it will last but so far so good 😊

useless instructions ,covered in grease, no way of fitting nibbler indeed is just totally useless, Wited to wind died down before i shiffted 9 ft shhets of metal onto roof, (at 76 yrs old thats reasonable. ) So left with rotten roof and patio deck covered in roofing supplies. thanks for nothing...

I wanted to cut panels from the sides of my van to install windows. This nibbler made it very easy to do. The only thing was that it couldn't cut right down to the line I required so I had to grind/ file round the edge to level the cut with the inner panel skin. Also a wee bit difficult going round corners. But overall it worked well.