Pool Fountain, LONGRUNNEW Transparent Acrylic Pool Waterfall Spillway with Pipe Connector Kits for Indoor/Outdoor Decorative, 23.6 Inches Pool Water Feature for Garden Patio, Backyard Koi Pond Decor

The media could not be loaded. Great smooth water cascading to next pool adds to the esthetic of the water feature, easy installation no tools required for this one

I replaced the cheap all in one that the installer put in. The original had a flimsy led strip that was like scotch tape and failed after a few months. The original also had 2 inlets (this has one which is easier to install plus the waterfall is much stronger)This unit has a separate light bar (sold separately) which is much better quality plus it has an app to change the light colors. I purchased an extra light bar so I don't have to worry about it failing and a replacement is impossible to obtain.

Works really well for my outdoor goldfish pond

The plastic "arms" on the sides of the acrylic are very easy to break. I put a small amount of tension on it and snapped the tip off. Had to break the other side and sand to match. This is a FYI. Also, as others have stated, the size of the adapters make it a bit of a puzzle to incorporate. I did not get lights so I cannot comment on those.

The media could not be loaded. I was worried about the flow rate but I used 1.5in PVC to the 3 spillways with a 2hp pump. Worked out great. Customer extremely happy!

I was hoping of creating a stunning focal point for my backyard pond. The idea of a sleek, crystal-clear acrylic spout producing a smooth, tranquil flow of water sounded perfect. Unfortunately, the reality of this product was a massive letdown. I made the mistake of trusting the photos and descriptions, and I’m here to warn others so they don’t have to deal with the same disappointment.The most glaring issue was the condition of the acrylic. From the moment I unboxed it, I was met with scratches all over the surface. These weren’t subtle blemishes you could overlook; they were obvious and ruined the entire appearance. The acrylic, which is supposed to be a clear and elegant material, ended up looking cloudy and cheap. Instead of elevating the space, it detracted from the pond’s aesthetic, making it seem like a poorly executed DIY project.I even tried cleaning and buffing the surface, hoping it was just a film or residue from packaging. Unfortunately, the scratches were deep and permanent, a clear indication of either poor quality control or substandard materials. For a product meant to showcase elegance and style, this was an unforgivable flaw.The water flow itself was decent, and installation wasn’t overly complicated, though it did require some adjustments to get everything aligned correctly. But no matter how well the water flowed, the scratched acrylic destroyed any visual appeal. The scratches catch the light in all the wrong ways, making the spout look old and damaged even though it’s brand new.This product is marketed as a decorative feature, but how can it serve that purpose when its main component looks so unattractive? I can’t express enough how disappointed I am with this purchase. If you’re considering it, I strongly advise against it unless you’re okay with a product that looks far worse in person than it does in the promotional images.

Assembly is straight-forward, but one should assemble like this. Throw away the vinyl tape that came with this. Buy a better quality, thicker and less likely to tangle, tape to cover the threads of the inlet pipe and the plug. Roll 5 times around the threads. Get some pipe "dope" and cover the taped threads. This will ensure a leak-proof seal. I purchased these items at our local Ace Hardware.Absolutely beautiful waterfall with no leaks.

The media could not be loaded. I have purchased three LONGRUN Fountains with some success and failure. So, I’m both satisfied and disappointed. The first unit I purchased was the 12” stainless steel unit. It is shown in Video 2. Works great. I purchased the LED separately and it did not work. I check in before mounting to the waterfall. The company sent a replacement which has operated for over a month. The second waterfall I purchased was a 12” acrylic combination unit with the LED. This unit comes with the top enclosed and supported by small plastic supports creating a tube-like affect. I would not recommend this unit. If the water contains any particles the collect on these supports causing the water flow to separate. The only way it will work is to highly filter the water. I first tried to cut the supports using a saber saw. Some success but still created a water flow problem, I also installed a flow valve to help it properly function. Finally, out of frustration I took a grinder and removed the top acrylic exposing the fountain the same as the stainless units. Works great now as shown in video 3. Just purchase the stainless-steel units. The third water fall units is 24” and works fine as show in video 1 I purchased the LED separately and fail after a few days. Quickly replaced and is now working as expected. The fountains are a nice addition to my landscape, just stay away from the acrylic unit. I’m and old shop teacher so have tools to make anything work….See additional video in reviews on 12" waterfalls both stainless and acrylic.