PC-Products 087770 PC-7 Heavy Duty Permanent Repair Paste Epoxy, 1/2 Pound, Dark Grey

Repaired a casting that had a hole in it took a couple of days to harden off but was nice and strong

I used this filler to repair holes and cracks in my asphalt floor which were caused by carpet gripper rods. It worked perfectly, although it is quite hard to use. You need a strong metal trowel to apply as the filler is extremely thick, almost like putty. The colour was a dark grey which blended in quite well with the black floor.

Used to fill in a large crack in a concrete fence post and doing the job well after three years.

Pc7 is a epoxy filler that will fix anything from plastics wood metal glass etc. that will last permanently. this can be sanded drilled and taped the uses for this pc7 is endless.

I found it quite messy but adhered well. I was fixing small tiles to a mannequin so fault on my part for choosing this for this particular fiddly job , as very thick and not that easy to apply without it going everywhere. I mixed in small batches as sets fairly quickly. I expect for other jobs this would be perfect but for me back to hard as nails

I used this to repair a rotten piece of ood once I cut out the old stuff. This was easy to mix and apply. The paste stuck well to the wood and was solid once hardened.

This is my second purchase. It is absolutely amazing. I have tried too many other products to mention and all a waste of money. I have sealed a cast iron outside pipe, no problem. Moulded plastic to metal. There really is no limit to its ability. Highly, highly recommend. Don't waste your money on products that promise but do not deliver. Setting time is speedy aswell. Thank you one million times.

As someone new to using epoxy filler I was a little anxious approaching this job, however I mixed the two parts with a plastering trowel in an old ice cream container with a bit of effort but easier than anticipated. Found the sticky consistency a little tricky as it tended to stay stuck to the trowel and pull away from the pipe until I learned the best tactic was using small amounts smeared firmly onto the cracked pipe I was mending. Has set very hard and needs some sharp bits smoothed off. Overall pleased with product.