14 Pieces Screw Extractor Set, 35# Cr-Mo & 6542 HSS Steel Cobalt Left Hand Drill Bits Set for Removing Stripped Screws and Broken Bolts Ez Out Screw Extractor Set Broken Bolt Extractor Kit

After snapping a bolt on my Indian Scout, I purchased this extractor set and got to work. It took a bit of finessing to get the drill bit seated right, but in the end, I got the bolt out. I would encourage you to also make sure you have some very small box wrenches on hand. I tried using pliers but couldn't get a good grip, ran to Harbor Freight and got a 5/32 box end wrench to complete the job.

I used this screw extractor set to remove a couple of stripped screws, and it worked really well. It took a bit of patience, but the bits gripped nicely and got the screws out without damaging anything.The set feels sturdy and comes in a compact case, which is great for storage. A useful tool to have around for small repairs. Glad I bought it!

left thread drill bits and extractors. So drill bit will loosen a little in drill. need electric drill to get the rpms needed. work from small drill bit up to bigger. this worked for me to extract a broken toro blade bolt. the other type of extractor that are like sockets don't work because the metal is too soft on the bolt heads and they just slip off. will use anti-seize on my new bolt this time. tried all sizes of SAE and Metric sockets and wrenches and none would fit the extractor size I had tapped in with the hammer to grab in drilled hole. Had to use adjustable wrench and tap with hammer to finally be able to screw out the bolt.

Came in a great box and exceeded my expectation! Even came with some spare smaller bits and extractors. Worked great with my ryobi one+ drill. Had a broken screw in my rv ac shroud that broke. Bit and extractors wired first time and saved me a ton of money! Highly recommended this set for anyone to have on hand.

Worked exactly as it should. Bought a different brand previously and the heads snapped off immediately. Not with these.

Drill bits were too soft and weak to actually go into the screw we were trying to extract. We used a different drill bit set to drill into the screw, then swapped to the extractors. The extractor stripped in the drill and didn’t actually have an impact on the screw. We ended up just drilling the screw out with the other drill bits that we already had. Horrible value, do not recommend.

The bits do not cut into hard steel. Had to be returned.

This tool worked exactly the way it was designed for. Real easy to use and it’s works. I would recommend adding this product to your toolbox!