Specifications: Voltage: 3.6V Capacity: 2.1 Ah Size: Battery Pack Chemistry: Lithium Thionyl Chloride (Li-SOCI2) Brand: Tadiran Termination Style: Connector - 2 Pin Shelf Life: 10+ Years Diameter(max): 16.7 mm (0.66 in) Height (max): 61..1 mm (2.402 in) Typical weight: 27g (0.95 oz) Included Qty: 1 Key Features: High operating voltage, stable during most of the application lifetime Some of the highest nominal capacities on the market today Excellent reliability over extended operating life Operating Temperature Range: -60°C/+85°C (-76°F/+185°F) Low self-discharge rate (less than 1% after 1 year of storage at + 20°C) Excellent resistance to humid environments Low magnetic signature Non-flammable (and non-pressurized at ambient temperature) inorganic (but corrosive) electrolyte Less than 1% capacity loss during storage at ambient temperature before use Warning: This battery is not rechargeable. Do not try to recharge. The storage area should be clean, cool (not exceeding +30 Deg C ), dry and ventilated Don't use different models of battery in series. Do not use if the battery casing was mangled
M**R
Great for older computers.
I used this in my very old AST 286 computer. Works as expected! Clock is retaining settings again.
E**E
Perfect for keeping an aged Packard Bell Legend 610 Running
I recently acquired an old Packard Bell Legend 610 486 computer. Amazingly, the previous owner had the original Varta 3.6v battery replaced, but un-amazingly the replacement was beginning to leak. Thankfully this PB400 model had the option to use an external battery (I was not going to disassemble the computer to de-solder the existing battery and replace it only to have to do it all over again) and this TL-5242/W was truly 'plug and play'. I simply snipped the old battery out, changed jumper settings, and plugged this in. All with power physically disconnected, of course.It works. Now I no longer have to worry about the old battery leaking and destroying the motherboard, but I am not losing hours of time each day.
J**H
Great for vintage computers!
I've purchased several of these batteries for vintage motherboards that have external battery connectors/headers. They are a perfect alternative/replacement for the older soldered on NiCad and lithium batteries. They come with a pre-attached piece of velcro so they can be safely mounted far away from your motherboard.
J**A
It works
Hooked it up to a 1995 Pentium motherboard to replace the soldered-on CMOS battery, works just fine.
O**L
Does what it is supposed to.
Worked great for my Varta replacement on an old 386 board. I just had to drill out the blocked center hole in the connector.
Trustpilot
2 months ago
1 week ago
