LEKUFEE Portable Waterproof Hard Case for DJI Mini 4K/DJI Mini 2 SE Drone/DJI Mini 2 Drone and Mavic Mini 2 Accessories (Not Include Mini 2 Drones and Accessories)

It can be difficult to judge from pictures just how good (or bad) a product can be.Reviews give you a fighting chance but there is always an element of risk.This case turned out to be one of my better chance purchases as it really is superb quality.The hinges feel nice with no free play side to side movement as are the two clamps which close with a satisfying click.I got this for my DJI mini 2 SE drone and the cut outs in the very firm foam are a perfect fit.Been some questions if the drone will fit if you use the propeller guard, answer being yes it will but is ackward to get the drone out again as it is quite a tight fit.However I did find if I put the drone in upside down (see photo) with the prop guard attached it is still very securely protected but is also easier to remove from the foam.It also leaves a little room underneath the drone for extras like spare props etc.I use 3 batteries which all fit in the DJI Mini 2 Two-Way Charging Hub (fits in its own compartment under the remote controller) but you also have space for 5 more, 1 being in the drone and 4 more in the foam cutouts.Overall a nice compact case small enough to fit in a ruck sack.

Good solid, sturdy case. Cant go wrong with it. Fits everything I need

A good solid well made bit of kit which fits my mini 4k drone perfectly, it also fits with the prop guard on. There is also space for a couple of spares and additional batteries without it becoming a box of clutter. These cases are great for protecting your drone as I also use the same cases for my camera gear and I have never had any damage, I would definitely recommend this and next day delivery from Amazon made it a no brainer.

Really impressed with the quality of this case and the price point is very good compared to other hard case options for the DJI Mini 2.The DJI case that comes with the mini 2 fly more combo is great for casual use but provides minimal protection and I needed something more substantial when transporting/on location and this ticks all the boxes.Everything from the fly more combo fits in this case and the foam is perfectly cut to allow this, even the uk three pin plug. As with most hard cases for the DJ Mini 2 they are designed for the US plug which this one is, and I’ve seen people have had issues fitting the UK plug in. But you two options of where you put the UK plug with this case and both allow you to close the case. First option as shown in picture 3 if you use the cutout cut for the plug the uk three pin does slightly hinder removal of the drone, but if you place the plug in one of the cutouts for the battery (picture 2) this doesn’t block the drone, although slightly covers one of the other battery cutouts, but for me I use that to store spare propellers so works for me.I can’t see me using the small cut outs for memory cards, and spare sticks so may adapt this area to house some ND filters.I’ve also included a couple of pictures showing this case next to the DJI case for size comparison.

as another person who posted , this it is built like a tank , hard sturdy case , good clasps , rubber seal gasket also takes a drone rotor cover very well nice and snug fit , can also carry quite a bit of gear in here , lots of room for batteries . spare rotor blades, usb cables . deffo worth getting if you want to keep you gear intact ,

Perfect drone storage and very robust.

The second you unpack this case, you know you made a good choice, it is built like a tank. There is a rubber moisture seal around the base, and a pressure equalisation thumbscrew, to prevent the case from vacuum locking. The build quality is excellent, easily as good as something from Pelican. The base foam is semi-rigid and the cut-outs are very precise. The lid opens 90 degrees and remains in the open position very securely. The locking tabs open and close with a satisfying click and are secure, without being finger-breaking. There was only one thing I was concerned about, before buying this case, and that was the worry that closing the case would press the lid foam down onto the drone propellers, so I was delighted to discover that the lid foam hovers a couple of millimetres above the case contents, therefore preventing the contents from moving around, but not pressing down onto either the drone motors or propellers. Which in my opinion makes this case 100% perfect.

So far so good. Good quality product, as described. Dron and all bits fit in perfectly.