XtremepowerUS 3200W Electric Power Disc Cutter Circular Demo Saw For Wet/Dry Concrete Guide Roller Cut Off, 16"

Works good, has a slow start so it doesn't jump off the cut mark. I added a valve on the hose to proportion flow, it doesn't need a lot of water to cut well, Less mess. Blade included cut good for the whole job.

<<<<muy buena

Bought this 6-8 months ago, finally put it to use today. I was a little scared to use the water function, but totally necessary I my sitch. It worked well, cut though 4 inch deep limestone super quick, and I made 4 - 4” deep cuts 12” long each through a solid block of marble. Blew the 20 amp fuse each cut through the marble, but it did the job I needed!! First cut was a little off but the rest were fine! It’s was me, not the machine.So yeah it’s worth the cost, it’s a little beast!The instruction manual needs a little help, and the last couple pages seemed to be talking about a totally different machine, so beware there may be a little problem solving on your part. The video of not finding the blade lock to put the blade on, use the wrench to hold the nut, the Allen key takes the bolt out of the center.And I will probably get a better blade,

When fully adjusting the depth plate to cut maximum depth the water line, supply to both sides of blade cover, interfere depth guide adjustment arm and the blade guard cover is forced to tilt in a way that brings the bolt (attaching the depth guide and adjustment arm) get too close to the blade; that design fault could eventually ruin the waterline and worse that could happen is if the blade and mentioned bolt rub together while saw is in use. If the bolt is reversed in installation insertion entry, in contrary to its delivered pre-assembled state, the bolt would be farther away ftomthe blade and should be safer. The blade can only extend 5 and a half inches from the blade guide. The blade is hard to install and harder to remove due to lack of enough clearance. The manual that was delivered with the saw is basically useless; it lacks clear pictures, assembly illustration, and it mentions lots of nonsense. No way to be sure how to ptoperly install the blade including the washers. I purchased a blade from the same company, both saw and blade from same manufacturer. Blade shows indication arrows, blade arrow turn indicator on one side is the complete opposite of the other side in relation to the blade teeth aggresiveness design. Will update after checking a replacement from Amazon.UPDATE: I also returned the replacement because of lack of availability of the missing parts and Amazon refused to try another replacement. Replacement arrived after 2 weeks, with manufacturer's box, no outer Amazon box. Bolts to attach the depth of cut guide plate are missing. Very poorly located packaging of some of the parts to be assembled; a slightly torn seam taping appeared to also caused a small tear of the small plastic bag that contained some smaller parts. The small plastic bag is positioned immediately just inside the taped middle seam of the manufacture's box.Note: I was trying to hold the initial purchase until I received the replacement but I was notified that the replacement will not be sent until it has received back the defective saw. I could have tried and get the same saw for a third time with 20% increased cost but I opted for another brand for quicker delivery.

I don’t have to cut concrete very often so I did not want to spend the money on a name brand saw and thought I would give this a try. It is easy to use and cuts straight. Not very heavy compared to a gas saw. As others have said you cannot push it or you will trip your breaker. I had it plugged into a 20amp circuit and it tripped anytime I tried to hurry. Let the saw do the work and it is fine.

Beautiful machine and perfect price.

I personally never bought a saw without it not coming with a blade! Times have changed. It is heavy. Cut concrete block okay, but asphalt was below expectations, you need to baby the saw otherwise it will pop the fuse! Depth gauge was bent slightly but fixable. No manual included.

I decided to buy this verses renting one from Home Depot. It paid for itself in the first job. This machine is a workhorse. The only thing I struggled with was finding a 30 amp breaker to run it. It does ok on a 20 amp breaker but you fave to really watch how much you push it or it will trip the breaker. Overall really solid machine!