RYANSTAR Carbon Fiber Shift knob Round Ball Racing Gear Shift Shifter Knob, Head Manual Car with 8mm/10mm/11mm Adapter

I installed this in my Toyota Tacoma and it was an easy install. I had ordered a different shift knob, but it only had plastic adapters and would never screw on tight. This one has three screws that tighten the shift knob onto the gear shift. The weight is good and it's a nice feeling shift knob. I wish they made a smaller one for the 4x4 transfer case shift knob. If they did, I would definitely get it.

Flipping the collar over hides the spring for the reverse lockout on my Chevy Sonic. I then used a price of electrical tape to cover the screws. My stock shift knob started falling apart and Chevy doesn't sell just the shift knob, only sells it as a shifter assembly. I purchased a shift knob off eBay that was supposed to be a replacement but it did not fit, the opening was too wide for the shaft and it was also too shallow. Only downside to this is because it has to work with the reverse lockout it has to sit about 1.5" higher then the stock shift knob, not ideal, but not awful.

Decent weight, clean, easy install. Most knobs are screw in, but my lever didn't have a thread so this one was perfect, it comes with several rubber converters, the right one slides on snugly and you install 3 screws at the base that bite into the rubber converter sleeve. Pretty solid adhesion. So far so good. Little gap at the bottom but nothing too crazy. My reverse requires to lift up on the bottom shaft to engage, so if you have that you will need to install it just shallow enough to work.

This is exactly what I was looking for to upgrade the knob on the Logitech g29 shifter. Beautiful gloss carbon fiber, it’s heavy, smooth, and just looks great. Comes with 4 different rubber things to fit a verity of shifters, I used the one with the smallest opening for a snug fit and then tightened down all the Allen screws and it’s not going anywhere. If your looking for a short, round style shifter for a cheap and nice looking upgrade for your g29 I would def recommend this one. It was delivered the next day too.

The media could not be loaded. It kinda fit however the connector for the rod didnt fit well. It would spin and move around, tried to twist it the right as many times as i could and it never locked in place.

I have to say when I first opened the box, I was happy with the texture and the look... I was even happier when I turned the largest adapter, placed the shifter knob on and screwed it in; the look and feel of the shifter knob is great. This is when I noticed the first issue. Too much space (about 3/4” of my shifter bars metal exposed.One day in, the shifter knob is turning. This started while I was aggressively driving, so I semi- freaked when the part that helps you accelerate suddenly starts doing it’s own thing. Once I tightened it, it began to release again as the screws started unscrewing under pressure.I’ll probably use superglue on the screws if it happens again, but to rig it, I first spun electrical tape around the adapter for a tighter fit, then I took the panel and boot, lifted them and wrapped electrical tape under the boot, so it will stay flush against the shifter.After all is said, I still like the look and feel, but had to invoke a little critical thinking to get it to a point I’m happy with.

I've had it installed now for 2w, roughly 1200 miles give or take. If you use the correct rubber sleeve and tighten the 3 allen keys you won't have any issue! FANTASTIC finish 👏 worth every cent.

Easy install, looks great and feels good shifting