Whats the difference in quick fill and no quick fill when getting a gravity fill hatch?

Look closer at the photo showing the quick fill device when you click on that option. There you see a hose and a brass end fitting where you then screw your hose directly onto the brass fitting similar to attaching your hose to a faucet or sprayer etc. Now this allows you to fill your tank faster because your hose or city water hose has a lot of pressure. The down side to this that I find as a negative is you can all to easily over fill your fresh water tank especially your older RV's and end up flooding your RV wall and flooring around the tank. I am in the midst of a long repair job to past owners neglect of filling their fresh tank and not running their air intake hose to the small screen air outlet you see on this fill hatch. I bought the RV in Feb. Seller was smart to sell when Temps in NW USA were below freezing to mask and hide the mildew scent. He did a lot of hide the damage techniques as will as lay down hard flooring but as soon as it was warming up this spring oh my gosh. I do not recommend anyone using the so called quick fill set up. And always check your fresh water tank plumbing to insure all the hoses including the air release and intake is connected properly. If however you do want the quick fill system I recommend using a reliable water meter so you can stop the fill about 5% maybe even 10% before it's full. This also depends on if you start with an empty water tank or partially full. Also the sensors for fill are not always reliable too so just use common sense. Spend a minute or two longer and pay attention to filling the tank. Too bad there's no way to see how full your tanks are from outside the RV via a viewing window. But no such thing exists.

What is the outside diameter of the barbed end? It says it fits 1.25" - 1.5" hose but that is a big variation

The barbed end is stepped. The outer end is 1.25 diameter, then it steps up to 1.5 diameter. Check out the photo closeup, it does show both diameters on the barbed end.

The pic shows it has a 4 3/4 diameter and bottom description states it has 4.5 diameter. Which one is it?

My rec-pro round fill hatch is 4 3/4 in. outside diameter, with a 3 1/2 in. mounting hole.

Does the cap make a water tight seal to prevent leaking when water sloshes up to it?

The most important detail that prevents leaking from your fresh water tank is the air intake hose. YOU MUST make sure at all times the air hose is attached firmly to the intake on this or any other water inlet to the tank. I'm in the process of cleaning and repairing damage done to a 22 year old class B+ RV that people had no insight or understanding that the water sloshed all over and under the tank's bay was coming out of the loose air intake. This was probably years of neglect. And all preventable. To add a little more insult to the problem the intake hose was left to wiggle about and it developed black mold that now black mold is in the bottom of the fresh water tank inside the tank. So all lines and tank has to be sanitized and best to do it multiple times. Also the tank had to be removed causing all sensors to be cut to pull it out. The sensor wires I left 4-5 inches on the tank so it can be re-wired however the wires it needs to attach to are difficult to re-attach due to poor wiring and need to repair rotted wood the electric box and wires are run under and into. I've repaired all of that. If you have water in the wall around your tank and it runs up the wall and above the water intake like this item is check for window leaks or suspect window leaks or leaks starting at the roof to side seams. That was another problem I'm now in the process of fixing. I thought I was done only to discover the lower wall below the window was rotting and damp behind the vinyl wall lamination. Today I'm spreading wood hardener over all the rotted wood areas that have been cleaned and dried and scraped and moldicide treatments over a 2 week process and now it's time for rebuilding with the wood hardener first. Then any gashes or low points due to damage and scraping both will get filled in with wood bondo filler they make that brand for wood. And once that's dry and sanded smooth the new heavy duty wall vinyl will be put on and where there may be a seam where it meets the dry original good wall paper I'll put by screw or nail a trim piece. Looking at going with a wood piece and maybe screws so anyone in the future may want to change it out. Keep it as simple and as esthetic as possible so no ones the wiser. This is what the past owner should have done that passed this mess on to me instead of laying down hard flooring and placing bits of this and that around to COVER up the damage from inspection at night at below freezing temps. I actually did detect mildew and commented but the lady with me and her 40 year old son both claimed they could not smell it either along with the seller. I drove it 550 miles home and sure enough my husband also claimed he could not smell it. By then it was driving me crazy but as soon as the outdoor temps hit higher 50's everyone else could smell it too. I quickly located the tank and air hose source. Cleaned it all up only to smell lighter scent of mildew. WHAT? NO WAY I thought I'd checked it all. But sure enough in the opposite dinette bay and storage area was damage going up and into the wall. Clearly tracked it to the left side corner of a large window. And when working on that eventually tracked it to the other corner of the window now also over the bay I had spent two weeks repairing. So in between no wall damage. So removed as best I could all wall paper from an even cut line below and set up fans to dry it out. We are in a rainy period in NW MT so humidity isn't helping. I'm running fans 24/7 basically. I also had put in a fancy MaxxAir Deluxe in and out fan in the coach so am running it at 50% day and night too. Lucky this fan can be open and running when it's raining. All of this helps. The wood filler needs good ventilation to apply. Due to being in such an enclosed area with fans or not I'm working in small sections at a time. These need to be treated 4-7 layers of hardener. You work quick as it can dry in just a few minutes. Throw away brushes are recommended so this is not for the faint of heart.

Desertcart Logo

交付 SINGAPORE

获得最佳体验获取应用程序

下载应用程序

我们从

阿联酋
英国
印度
美国
日本
KOREA

客户服务

关于我们

客户支持

描述

🚐 Fill Up in Style!

BUILT TO LAST - UV resistant for year-round durability.
UNIVERSAL FIT - Compatible with most RV models for versatile use.
SLEEK AESTHETIC - Blend seamlessly with your RV's design.
LIGHTWEIGHT CONVENIENCE - Weighs only 2.08 ounces for easy installation.
EFFORTLESS WATER FILLING - Experience hassle-free tank filling without pressure!

The RecProRV Round Fresh Water Gravity Fill Hatch Inlet is a lightweight, durable solution for RV and camper water systems, designed for easy tank filling without pressure. Its UV-resistant design ensures it maintains its sleek appearance over time, making it a practical and stylish addition to your vehicle.

D**N

Great fit

Exactly what I needed

2.09.2025

S**.

Great product

Used this on my camper. Still working great over a year later

23.09.2025

D**S

Easy installation!

Quality product. Easy to install!

6.08.2025

H**Y

RV fresh water tank fill adapter

Item is the same as original that came on camper. I was hoping it would be a little thicker and better quality, but fit well.

11.06.2025

Z**Z

Good buy.

Worked as it should. Easy install.

2.07.2025

P**Y

RV water holding tank fill

I liked this water inlet, it does what it is supposed to do, what I don't like is that the flange is curved. In RVs we always worry about leaks, but I think it sealed good. Time will tell. Did give it 5 stars for ease of installation and it does what it claims to do but I think if it was a bit thicker material it would be fantastic.

20.05.2025

L**N

Fit my Jayco

This was identical to the original fill tube on my Jayco camper. Super easy to changeout.

19.07.2025

J**G

Perfect fit

Fit my camper perfectly

15.07.2025

常见问题

产品是真实而真实的吗？+

是的，所有产品均直接来自美国，英国，阿联酋和印度的授权零售商。我们保持严格的质量控制过程，并在运输前验证每种产品。所有项目都有适用的制造商保证，并由我们的标准退货政策涵盖。

交货需要多长时间，这是可靠的？+

送货时间因目的地国家 /地区不等，通常从3-9个工作日不等。每个订单都可以通过我们的系统完全跟踪。我们处理所有关闭范围，并使用可靠的快递合作伙伴进行最后一英里的交付。您将通过电子邮件和我们的应用程序定期收到有关您的订单状态的更新。

什么是凡人车？从安全订购安全吗？+

自2014年以来，落伍车是一个国际电子商务平台。我们每天在全球范围内安全地处理数千个订单。每个产品都会在交付前经过我们的质量验证过程，我们提供端到端订单跟踪，24/7客户支持以及全面的回报政策，以确保安全的购物体验。

产品定价如何计算？+

我们的价格包括产品成本，国际运输，进口关税，关税和当地交货费用。我们处理所有海关和导入程序，确保交货时没有隐藏的费用。 Pro会员将获得额外的福利，包括免费送货。

S$31

关税和税费包括

SINGAPORE店铺

免费退货

30天对于 PRO 会员用户

15天无会员资格

安全交易

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

TrustPilot

TrustScore 4.5 | 7,300多个评论

尤素夫·A.

总体来说，体验非常棒。会推荐给朋友和家人。

1 个月前

Ayesha M.

产品与描述完全相符。对我的购买非常满意。

5天前

查看所有TrustPiLot评论

Manufacturer	RecPro
Brand	RecPro
Item Weight	2.08 ounces
Package Dimensions	6.61 x 4.84 x 2.01 inches
Item model number	321A-FBA
Manufacturer Part Number	321A-FBA

RecPro RV Round Fresh Water Gravity Fill Hatch Inlet | RV Water Fill Hatch | Camper Water Inlet Hatch | Trailer Water Fill Hatch Inlet (Black, No Quick Fill)

描述

规格

有问题吗？看看别人问了什么

评论

常见问题