VIVO Large Keyboard Tray Under Desk Pull Out with Extra Sturdy C Clamp Mount System, 27 (33 Including Clamps) x 11 Inch Slide-Out Platform Computer Drawer for Typing, Black, MOUNT-KB05E

Beautiful wood, Size is perfect for standard keyboard and mouse with pad. Great price. Very sturdy and durable. Easy to use, harder to assemble. Instructions are a bit unclear but we figured it out.Material feels like sturdy metal and wood; no cheap plastic.

Update January 2022Tray is great but if you're like my wife who likes to rest her elbows on the tray... over time the (4) M4 screws that attach the sliding rails to the tray will strip. This will cause the whole tray to fall and can be quite dangerous. This happened at least 3 times until the screws were useless.I was on the verge of buying another tray when I decided to see if I can replace the screws. For less than a $1, I replaced the M4 screws with longer M4-0.7 x 8mm. You can get this at your local big box hardware store. I also recommend adding a dap of locktite on the screws as well to avoid them loosening on their own.This made the tray extremely sturdy without jamming up the slide. M4-0.7 x 10mm would be too long. So stick to the 8mm. I believe the original M4 were only 5mm.Highly recommend everyone to do this to make the tray more sturdy and safe. Wife is happy again! CHEERS!**********************WFH, my wife works at the dining table which isn't the best for ergonomics. After awhile her wrists/hands were hurting because the table, where her keyboard was, was too high. A keyboard tray would be the solution but since it's a dining table there were challenges to overcome and I got lucky with all the measurements.As a keyboard tray it's probably the best and largest one out there for an edge mounted configuration. I needed one to fit both a full 10-key size keyboard AND enough room for a mouse. This was the ONLY one that fit the need. The mounting hardware is very solid, heavy duty metal. For the parts that come in contact with the table, it comes with rubber pads for protection. It's sturdy enough to put some weight on, like if you wanted to rest your elbow on it.I'm going to provide some key specs that I couldn't find but is very important to know if it this will work for you:- The first is understanding the limit of how thick the table can be to use this. The max spec stated for this product is that it can support up to 1.75" thickness. I can safely say that it's an exact number. My dining table is exactly that thick. The mounting hardware will fit this thickness but it will be a bit tight, +/- 1/8" tolerance. So if your table is greater than 1.75" then this will not work for you as the mounting hardware will not fit.- Next is understanding the required depth from the edge of the table where you must have a flat surface underneath the table to clamp the bottom pressure plate to. The mounting hardware is attached via a clamp style mechanism. There is a metal plate at the bottom attached to a screw handle. You tighten this so it "clamps" to your table. This is important to note especially if your table has a recessed, beveled edge that curves underneath vs. a squared edge. Also sometimes, certain desk and tables have support hardware underneath that may interfere with the mounting point. My dining table had a recessed, beveled edge and it was questionable whether I'd have a solid flat surface to clamp to. PLEASE NOTE: FROM 1.5" in from the edge of the table, you must have a flat surface underneath the table to clamp on to. If 1.5" in from the edge of your table, the surface is curved, angled, or exceeds 1.75" in thickness, then you have no way to mount the hardware. 1.5" from the edge of the table is where the center of the screw plate.- Next is the amount of clearance you will have IF you have a 1.75" thick table. If you're pushing the max limit in table thickness, you are giving up clearance that may or may not allow you to retract the keyboard under the table when you're not using it. For me, I'm at the max thickness and as a result I only have 1.5" from the surface of the keyboard try to the bottom of my table. This means, my keyboard AND mouse cannot be taller than 1.5" in height. My wife uses a thin Logitech wireless keyboard that just meets this height but her MX Master 2 is too tall. As a result, while she has a keyboard tray she can use, she cannot retract it underneath the table. It was still worth using to be pain free. Since we're going to be in this WFH situation for the long haul, the need to tuck your keyboard away is trivial. I also should mention that if you have a ergo keyboard and it's important for you to store it underneath your table, it's highly this won't work for you. You need to have massive clearance for those keyboards.- Lastly, the one tip I have is some people have mentioned the keyboard seems to not stay in place if retracted all the way in or all the way out. I have the latter where the tray on the left side, for some reason, doesn't extend all the way out whereas the right side does. It turns out this is due to the mounting hardware on the side that has the issue being a bit rotated. All you need to do is rotate/twist the mounting hardware a bit to resolve the retraction/extension issue. Sometimes, what happens is my wife's chair will hit the tray and cause the mounting hardware to rotate a bit, which cause some warping or deflection of the keyboard tray tracks, which leads to the issue. The other problem could be that your flat surface is not leveled such that your mounting hardware are at different heights ever so slightly. Ultimately, the keyboard tray tracks need to be as leveled and parallel to each other as possible.I highly recommend if it works for your specifications.

I needed a large keyboard tray since I'm setting up a home office and wanted a clear desktop. The desk I had (student) came with a keyboard tray, but it was small. I used a compact keyboard with the mouse on the desk for temporary work-from-home situations. Having to work full-time, I need a full size keyboard. Assembly was fairly straight-forward. It is two pieces held together with brackets, but it is very sturdy. It is large enough for full-size keyboard (Logi) and mouse. I did take off one star since the sliding mechanism is not completely smooth. That may be by design to keep the tray from moving; not sure. Not a huge issue. The tray is very stable when extended. Clamping to desk is a breeze, just make sure there are no obstructions underneath. My desk has the support bar under, but it's far enough back to not interfere with the clamps. Also beware of desk height. I believe my desk is standard around 29" (?) and with this tray, I have my chair at the bottom of it's height level. I'm happy with this purchase.

I needed a clamp on drawer, but unfortunately my IKEA desk has a metal support bar lengthwise underneath that means only 6" for the drawer to slide back. I couldn't find any long skinny drawers (I need something that can hold rulers) or ones with a lot of clearance but saw this.It's fantastic! I think it would suck as a keyboard tray for my setup because it would jam against my knees or thighs (I sit high enough to use a keyboard on the actual desk). However, putting it off to the right as a rimless drawer keeps it nicely tucked away. And it is *solid*. Heavy metal and wood parts, very well machined. It slides fairly well though one glide is a little stickier than the other. It has enough clearance even with the back plate to slide back under the support bar. It holds very firmly to the 3/4" desk edge. While it's not a complete match to my pale maple veneer desk, it's tonally close enough. Now I have room for my cat's fleece pad in front of my right monitor and can still get at my organizer box of office supplies. Plus my new left monitor has a remote that sits on the sliding shelf where I won't lose it. I even put it together myself despite not being very strong or tool savvy. The instructions were nice and clear with a good mix of illustration and text, and a phillips head screwdriver is easy enough to use. I did position it over my computer so now it's slightly awkward to press the power on switch, but even though I have a huge tower there's still plenty of room especially as I generally only need to press that button once a day.Things that would make it even better: Black clamps and hardware to blend in more with my chair, keyboard, mouse pad and monitor base. Being one big shelf (it comes in two halves that bolt together with a backplate, which maybe gives it more center support, who knows, but that means the two halves don't match in grain or exact hue). Having some sort of grip underneath center front to help pull the shelf out -- needn't be big enough to jam into legs for someone using it for a keyboard, could even be a smoothly polished groove -- my hands are steadily seizing up and losing grip so even a smooth little ridge or bump on the bolted on back plate's edge near the tray front would go a long way. Having a tiny bevel at the bottom front; it currently has a sharpish edge that presses into my fingers when pulling the shelf out from under the desk. All of these are minor quibbles, none of them worth docking a star.