Dent Removal Kit, Car Dent Suction Puller, Aluminum Alloy High Quality Easy Bump Dent Remover, Bonus 2 Shovels & 1 Alcohol Bottle

Thought I’d give this a go to try and remove a dent that just appeared on the side of my car one day. Not sure how someone managed to dent it there, but they did.Anyway, I took photos throughout the whole process to document my progress.As you can see, using the tool is fairly straightforward. As stated on the product page you will require your own hot glue gun.One thing I would say, is use lots of glue. Don’t just add it to the base of the attachement. Add the glue the entire way around as you can see in my photo. When I added it just to the base, it just came off and stayed stuck to the car. By adding glue all the way around it creates a solid between the car and the attachement.As you can see, I was definitely able to undo some of the dent. Unfortunately it’s quite an awkward shaped and small dent but nonetheless I was able to remove part of it. It took a few attempts and I’m sure if I kept going I would be able to remove it all. I just didn’t have time today and so will pick it up another day and update once done.The pulling strength of the tool is very strong and I can easily see how larger and less awkward dents would be super easy to remove with this tool.Unfortunately my alcohol spray bottle was empty which is why I only gave it four stars. I keep a stock of alcohol wipes so I was able to use those but this was poor quality control from the manufacturer.If you have a dent on your car I would definitely give this a try before you consider paying for it to be repaired as the cost for this is minimal. Just make sure you use lots of glue and that it goes all the way around otherwise this will not work.

This is a great device for getting out dents. Note you will require a glue gun and you will need to be careful from the heat the glue makes on your car.What you get:6 x Aluminum rubber Tabs1 x Aluminum alloy bridge dent puller1 x Alcohol Spray Bottle2 x Rubber ScraperThis is not for the faint-hearted person as I believe some skill and knowledge is required to carry out the task.Watch many YouTube videos and then try when confident. And be careful not to scratch your paintwork by accidentally making contact with the aluminium alloy bridge dent puller.All the rubber tabs are different in size and it may be difficult to pull out a dent bigger than your hand size.Great product but skill and a glue gun is required.

To begin with, ensure you have a glue gun, glue sticks and rubbing alcohol or this set is incomplete (and I don’t think this is very clear).This kit was purchased for a dent in my husband’s passenger door. We applied it to the door 4 times and noticed a difference each time it was removed. (Unfortunately, this does not show in the pics I took) but there really is a noticeable difference, especially where the red paint is concerned. We are going to use this kit again in a couple of days and will update my review, but I can confirm that this kit does work (it has not fully restored the door to its former ‘un-dented-ness’. But there is a remarkable improvement).I would recommend this kit for small dings such as the one we had on the car.

The product was excellent and was easy to use. I pulled a fist sized dent out of my wife’s mx5 easy enough and it’s saved me having to pay a garage to do it. If you can’t get the puller off the car pour boiling water over the glue and it will come off easy scrape the glue off the car with the plastic scraper. You’ll be left with a smearing of glue on the paintwork if you don’t have any alcohol cleaner use WD40 it comes off a treat. 👍

i have a denti dont want the dent anymore so i bought this dent pullerlooks good, even says 100% satisfaction on the box so must be goodi polish my dent with meguiar's ultimate liquid wax so i used plenty of alcohol to remove the wax snd more alcohol to clean pullerfired up the glue gun and glued puller to vanleft glue to cool for 5 minutespuller popped off vehicle, still have dentcleaned glue from vehicle, more alcohol to vehicle and puller, more glue, left glue to cool for 10 minutespuller popped off vehicle, still have dentcleaned glue from vehicle, more alcohol, more glue, left glue to cool for 15 minutespuller popped off vehicle, still have dentcleaned glue from vehicle, applied meguiar's ultimate liquid wax and admired my dentpacked up puller and returned to amazonglue was very difficult to remove from vehicle, had to be scrapped off but pulled off puller far too easily so this is never going to work on anything more than could be pulled with a sucker.maybe the puller needs holes instead of dimples so the glue can get right through it ?, would be a nightmare to clean but would increase the grip.or just learn to love your dents :-)

Great quality product, done a great job of pulljng the dent out, only reason 4 stars not 5 is you also need a glue gun and glue sticks which i had, you put glue on the 3 pads then hold against car with center pad on dent,then wait 5 mins to dry and cool, you then screw center one out pulling dent out. Once dent is out use the plastic scrapper provided to get them off then clean off glue.Would recommend

I pranged my car on a post, why do people insist on putting low posts where drivers cant see them? It left a small dent n the center of the rear door panel, luckily no crease. This just popped it right out!!All you need is a hot glue gun, I had one already because I use it all the time ut this seller does offer on as an extra purchase.Put the glue on the puller place tha in the center of the dent ans wind down so the two 'pull posts' touch the panel around the dent. Leave to dry, you'll need to hold it or tape it into place leave 10 mins to dry. It comes with scrapers to remove nut a hairdryer or Isopropyl alcohol will remove fully too.It is very easy anyone could do this.Superb, 5 Stars I wish everything was as good. Great Product.

Bought specifically to try and remove some dents on my wifes car. Needed have bothered. Used my glue gun and the dents are still there. Enough said