Motorcycle Front Fork LED Turn Signals Universal Sequential Switchback Running Lights 12V Amber Blinkers W/Mounting Bracket fit Honda Harley Yamaha Suzuki Kawasaki

Looks nice.. simple install i believed until the tiny M4 stripped upon tightening the M6 Allen Bolt. It was either returning or taking a chance to repair it myself so i chose the latter. Even though I am a Prime member and have free returns this actually costs money for Amazon so what i did is drilled up to an M6 and tapped for M6 bolt... I also had to widen the opening to compensate for the larger bolt as you can see from the first photo you cannot close tight the clamp or else it will strip the M4 thread and use Red Loctite thread sealant. In the second photo it closes tight and securely because i drilled it up to M6.. My suggestion to the manufacturer is to make either the M4 bolt longer to 10mil or 15mil length or use a larger bolt like an M5 or M6 and like this you will reduce the Returns.

These signals are legit Brother. They are rock solid and very bright. For me these signals replaced my ugly factory fork mounted "bug eyes". A solid improvement and easy installation. Yes the wire is somewhat visible and the lens angle is the fork angle not straight forward . I added a layer of heat shrink tubing on mine to strengthen and hide the wire as a cable and crazy as it sounds. It works. The lens angle is perfect for forks if you really think about how angles and leaning...don't, it hurts.

They fit a little loose but are snug enough to stay will do the job. We're easy to install and functioned properly quality will have to be found out along the way they were pretty cheap I'm not expecting a lot

These lights are so bright and fit beautifully in the fork tubes. The wiring was not complicated and both the white light and turn signal work without issues.

Well made they're great