44pcs Red Cutting Wheel Set Compatible with Plastic for Rotary Tool, HSS Circular Saw Blades 6pcs, Resin Cutting Discs 20pcs, 545 Diamond Cutting Wheels 10pcs

Good quality, durable, time-saving, long-lasting, easy to use, sharp blades, cuts through most surfaces, variety of uses, very effective, shipped fast, and reasonably priced for quantity.

Great for the price cant go wrong with these of course if used wrong they will break and for me they seem stronger than name brand but thats just my opinion.

This works great for all kinds of DIY projects at home. I have used it a numerous times and it has saved me time and money. I have cut wood, light steel, bolts, plastic with the kit with no problems. It takes a little longer than using a sawzall but I can also get into tight places. It also works great when repairing Xboxes and other electrical components that are not designed to be taken apart to be repaired. I will buy again.

This was the perfect kit for what I needed. I needed a small cut off wheel to remove small metal tire valve caps that were seized onto the tire valves. Worked like a charm, five minutes each and done. my Dremel did not have enough power so simply hooked it to my drill and would 100% recommend this kit. Has a little bit of everything you may need and some extras. You may never use but for the price, it makes sense to have them handy.

Cutting disks are nice and sharp. Didn't shatter like some.others out there. Great price

Got the job done that I needed it to, cutting through hard wood to make a walnut ring. Very sketchy at first, with reasoning. 1. Make sure your dremel is TIGHTLY latched onto this and the screw is also tight. 2. Wear safety glasses. 3. Wear gloves when operating. This isn’t just something you want to use without these things. I currently have a scar above my eyebrow where the screw had came loose, it bruised the bridge of my nose and flew off full speed while mid cut and sliced me right open. It takes time to actually get through the wood too, it’s not very quick. This would be good for plastic pieces or epoxy. Not wood. On the plus side, my husband got a pretty nice new wedding ring out of it!

Rototool set, complete and usefull.

I only bought this for the resin cutting discs (the black ones). I used it to cut through rusted exhaust fasteners where an angle grinder would be too big/unwieldy. I used this kit with Harbor Freight's "1.3 Amp Variable Speed Rotary Tool Kit". To get an idea of what I had to cut through, I cut the following: 1. Cut straight through steel M10 exhaust studs to lop them off completely. I had to do two of these. 2. Cut a few sides off of steel M10 nuts so I could remove the nuts from the studs. This is for when the nut is so deformed and dissolved due to rust, that neither a regular nor extractor socket could be used. Just cut off a side or two, the nut's clamping power will be relieved then the remnants of the nut can be popped off the threads sideways/perpendicular to bolt's length, with a hammer and chisel. I had to do this with three nuts and these discs. 3. Cut straight through flat 1/2" wide stainless steel exhaust clamps holding heat shields on, the nuts and bolts holding the heat shields on were too far gone to get any type of socket on, had to do about six of these. I used a single resin disc to cut through all of those. For the price I was expecting rotten quality: discs exploding on me, wearing down really fast, flying off mandrels, etc. Instead I only needed to use one disc for all of it, the mandrel didn't fail or loosen, by the time I was finished the disc was barely worn and still usable. The performance for the price was great and a nice surprise. I intend to continue using it until that disc fails which is probably not going to be any time soon. Having the ability to cut through metal with such small discs is very handy. Cutting straight through an M10 exhaust stud took about one minute, without applying any pressure either just let the speed do the work, make sure you wear safety squints, gloves and block the sparks if necessary, may want to wear a mask with a particulate filter too, otherwise you can taste the dust lol. Everything in the kit comes in a handy vinyl pouch with see through plastic pockets to organize the contents. I put the resin discs in a separate zip bag with a silica gel packet to keep it free of moisture and avoid water or atmospheric humidity from degrading the resin over time, though they're so small that even if they did come apart mid-cut I doubt they'd do any damage, at least unlike a 4-5 inch angle grinder wheel coming apart at 11000rpm LOL...

لابأس

Bought these cutting wheels to do little jobs here and there. So far, I've tried all these wheels on Dremmel to cut wood, metal and plastic, they worked fine. Might try on glass project at a later time.

تحل بعض المشاكل للمحترفين