下载应用程序
⚡ Power your projects with precision — fast, flexible, and future-ready!
This 5-pack of USB-C PD Trigger Boards enables fast charging and power delivery by supporting multiple protocols including PD3.0, QC4+, and PPS. Compact at just 23x11.5x4mm, these modules convert USB-C power sources into selectable 9V, 12V, 15V, or 20V DC outputs, perfect for upgrading traditional devices or powering custom electronics with up to 5A current. Ideal for professionals seeking versatile, reliable USB-C power solutions.
| ASIN | B0BY8H5MS1 |
| Item model number | 88ac4dd0-16e3-4812-80a4-a3431f7b9e82 |
| Manufacturer | DWEII |
| Package Dimensions | 8.79 x 6.5 x 1.09 cm; 9 g |
C**S
Hacen lo que dicen, estoy satisfecho con el producto
C**9
USB-C PD is confusing. If you don’t get the trigger voltage, you were looking for make sure the device you’re plugged into offers the voltage that you’re looking for to be triggered. These are great for powering projects, but if the trigger voltage you are trying to achieve is not available from the device you were trying to achieve it from you might get a different voltage. Down the road somebody could use a cheap cord or an insufficient battery bank and the device will not work properly. You have to plug it into a device that is also capable of USB-C power delivery for it to work 100% correctly. I bought a pack of 12 V presets. A lot of of laptop, chargers, and USB-C chargers don’t offer 12 V so I would get 9 V.
A**R
Low power noise and very easy to use. Do note that there's a tiny shunt on one of the pads you will have to desolder to change the voltage that is a miniature black square and blends in with the PCB. The voltage can easily be set by soldering the pads between the resistor of the voltage you want to the pad next to it, so it's very intuitive. It works well, despite mediocre build quality, and is small enough to fit in many projects!
T**D
Very handy if you have any projects that you want to power with a USB-C PD setup. These come pre set for 12V, but if you are able to solder to the board you can change them to other voltages. I kept mine at 12V but soldered them to a barrel jack to power an astrophotography camera and it works great. The female USB-C port on the board seems well made and has a small blue status led next to it, which is nice to have. The small black shied slides completely over the chip, so it can be installed even after you have attached the wires to your project. It does need to be secured with glue, make sure to use a glue compatible with Pcb's.
E**K
Should be zero. Came jumpered for 12 volts. Put 13.8 into it. 13.8 come out. Tried all jumper settings. No instructions. I assumed no jumpers is 5 volts as there is no 5v jumper setting. Essentially this board does nothing but light a blue LED. So be careful what you plug into this. My guess is this is leftover failed items the Chinese sent to us to buy.