Vanshly Tailgate Gate Rubbe‎r Compatible with 2015-2020 Ford F150 F-150/5.5 Foot Box Replace, FL3Z 99439A00-B FL3Z 99439A00-Ar Bumper Bushing LH Driver RH Passenger

Some have mentioned not fitting per the short pin. As w/almost everything today there is zero instructions...so it's trail and error. If you use a large Phillips head screwdriver, place the unit up against the hole, the push in on the screw it locks in place.Not sure if others tried that or even realized what you need to do.But they fit as from the factory!

The devices aren't sized properly (slightly too deep) which causes the tailgate to be incredibly difficult to shut; when it does shut it no longer flush-aligns with the adjacent body panels; and when it is shut the pressure of these pushing it outward creates a bind that prevents the tailgate from properly opening (you have to put a good bit of pressure pushing into the tailgate while activating the latch to allow it to release before you can pull it open).And the build quality is poor. The material is less rubber bumper/stop and more "hardened thermoplastic block" with no give. In addition, the mount is a push-pop fastener and not the screwed in anchor of the OEM parts. I made it literally 32 hours before one fell off (that's a single trip, with 3 tailgate open/close cycles).While the price may be attractive, you'd be better off paying for a better part and just avoiding this.

The bumpers worked fine and installed easily but they were definitely made more cheaply than the OEM versions. Good for the price, but I don't expect them to last very long.

title says it all

Messed my original ones up, but these worked great! Easy to install, and have had no issues in the weeks following.