for ELEGOO Saturn 3/Saturn 3 Ultra/Saturn 4/ Saturn 4 Ultra Screen Replacement,10.1 Inches 12K Monochrome Original 3D Printer Screen with 11520x5120 Resolution

Fits perfectly & works great... now let me share a few secrets that will make installing a LOT easier and faster! 1) You don't need to disassemble the unit into a million parts as their video shows! They do it because they want you to separate all of the wiring, but unless wiring is your problem, just leave it connected! Just take off the front plate. 2) No need to replace the LCD cable - just disconnect from the original LCD connector built in to the monitor. We are just going to connect the LCD connector to the existing cable! 3) The old lcd is hard as hell to lift out due to the super-strong glue/tape used by the factory. Even after heating, I couldn't get it out.. So I used a screwdriver to pry it out, which cracked to old LCD... but you don't need it anyway! Toss it! Save your time, just pop it off, remove the old glue, clean support edges up with alcohol, install the new double-sided tape supplied, and reconnect the new LCD. Use the included black protective tape to seal the LCD seam. 4) Screw the font plate back in place and you are ready to go. Total time about 15-20 minutes... your mileage may vary! If you are unsure just follow the video they made (quite good) and do it their way.!

Bought this as a replacement after I accidentally dropped the build plate on the original (oops!). Assembly wasn't too difficult, but take your time. It has been functioning perfectly.

showing photo of old screen, with the new one installed, part of the screen will not light up. EDIT: after my review, the seller contacted me and sent a replacement free of charge. New screen works great

Fantastic. Just wish I didnt have to buy them so often. But its due to use I know. We use the printers a lot. Decent price for what it replaces.

Perfect fit for my Saturn 3. The installation process is relatively simple. Mine was more of a challenge as some reason had leaked down and hardened the screen into place. On Saturn 3 the access plate is on the back side of the printer not the front.

I’ve bought twice to replace the LCD screen for my Saturn 3. Both times worked like a charm, no complaints. Shipping could be quicker

I searched the boxes well (I got two) and there is no double sided tape the holds the screen down.othwrwise it's fine. It's well packed with foam to prevent breakage. Replacement cables are in thr box if you need them.

Trash product. 1) The double sided tape that came with it to secure the screen to the module was random sizes. 2) the instructional install video on the website left out major steps 3) the flex ribbon cable is just barely long enough to actually secure it 4) after finally getting the cable to fit flush to secure it, all that was coming from the resolution test was a purple light. *all of the plugs were attached correctly* and the tape is facing the right way.* so obviously it’s not seated properly right? 5) reseating it several times over resulted in the buckle for the flex ribbon cable breaking. Hours wasted and now I have to figure out how to fix additional components of my machine.

Excellente repuesto original, para un cambio de pantalla

Original screen failed after a week, elegoo was shipping replacement from china so I got this as it was next day delivery. Watch video for instructions, fit without a problem in 30-40 minutes.

This works perfectly for Elegoo Saturn 4 ultra. Although the process of changing this is a long and delicate process.

問題なくワークしました。セルフ交換して。

Si devo dire che funziona molto bene! Il montaggio più facile del previsto.