Tub Repair Kit White, Tub Chip and Bathtub Repair Kit for Enamel, Fiberglass, Acrylic, Porcelain, Patch and Repairs Chips, Crack, Scratches, Rust, Holes on Tubs, Toilet, Sink, Shower, Tray in Bathroom

This product worked just as described to fill several small screw holes (from a sliding door which was removed) in a fiberglass shower enclosure. It was fast and easy to do and sanding was easy. The only advice I would add is to be aware that there are many shades of white and that the “white” of this product may not be a “perfect” match to every “white” fiberglass shower/tub enclosure. It is not hugely noticeable because the screw holes are very small, so I am happy with the results. But if you were patching a larger hole or crack, you may want to check the color before you commit.

This worked very well. Easy instructions, application went ok (a little messy, but manageable). Follow the instructions and make sure you wet sand!

We had just purchased a new tub enclosure but had a bold go through the back of it when we strapped it to the trailer.Bought this to patch it up.I used a dremel tool to grind out the old, flaking acrylic at the hole, then used this to fill it in. The color was a very close match to the white tub, however it was a bit difficult to spread. It kept wanting to run and took a long time to dry (like over an hour before I could touch it without messing it up). I ended up doing it over the course of two different days. One to just to an initial fill. Hard to get it smooth when it kept running on me. After the initial one, I could see the fiberglass backing through it still, so I did a second coat a few days later. I mixed up the second coat and waited a while before applying it, and it didn't run that time. Still hard to get it to spread evenly with the little spatula thing.The tape they provided was nearly the same color, but just a little off-white, which made it difficult to see where the tape was without having a bright light. It was also messy, since I had to keep working it with the small spatula until it dried enough to stop running.Overall, it did work and the hole was filled. The hole is barely noticeable, but the finish isn't as smooth as I would have liked.

I bought a house with an old tub that had chips in the porcelain making black spots on the tub. I used this product and it was pretty easy to use. I could have taken more time to make it smooth and perfect but the tub is so old and I just wanted to cover the black spots. Tub looks a thousand times better and it's been lasting with no changes.

This is great for filling in scratches; easy to use; squeeze only what you need; comes in white but can add paint (I used paint for kids to change the color). Probably works very well on a tub or sink with a crack. Dries fast but instruction states over nite. Would buy again.

product works but much more difficult to work with and get desired finish than described. repair turned out good but I had a tough area in the corner bottom radius area of the tub. use several lite coats works better. be prepared to sand for hours. I used polishing compound with a drill motor buffing wheel to get best finished results.

I’m very pleased with this little tub repair kit! The instructions were very straightforward. I had several places on our tub where the acrylic was chipped and it looked terrible. I used the repair kit and it literally is seamless and looks like a new tub! The color match was perfect.

Did not cover the hairline crack in my porcelain sink.I bought this kit because it received good reviews and I thought it would cover the hairline crack in my sink. I followed the instructions carefully. The first step was to sand the shiny surface of the sink, which I did. Then I cleaned the sink, mixed part a and b and then applied. I had to apply it fairly heavily to cover the crack. It look awful. I ended up removing it and called a granite place to replace the sink, which was quite costly. Perhaps it works better on tubs than sinks, but it definitely did not resolve my issue.