CAMWAY Clamp Meter TRMS 4000 Counts 600A AC Current AC/DC Voltage NCV Non-Contact Voltage Continuity Resistance Diode Hz Test Clamp Multimeter with Test Leads Alligator Clips Screwdriver

The media could not be loaded.  This is a great clamp meter that has good number of functions that auto adjusts.It comes well packaged in a recyclable box supplied with batteries and a screwdriver to open the battery compartment and get going straightaway.It comes with good quality flexible leads with aligator or crocodile clips. When changing over to the clips, you have to hold the clips in to prevent them being pushed out as the clips are not secured in the insulation boot.I looked at this in negative way but then when you look at the fact that you can change this makes it better as over time, the clips will wear out which will allow easy replacement.The NCV is quite sensitive and fairly accurate when trying to find a fault in a cable.As for the ohms reading, this is accurate when comparing with my current bulky meter. This new meter is the go-to for when I'm working on my car to put new lights and accessories in.The display is quite large to read from a reasonable distance so you're not squinting to read,The torch is ideal as it saves you having to hunt around for one when you need one.The material is quite tough and will manage knocks and bumps when thrown in your toolbox.As you can see from the video, it's quite easy to go through the various selections single-handedly.One thing that was disappointing is that although this meter is great, it lacks a robust case to protect it so may be worth getting one to fit if you do choose this.

Cheap and cheerful but works

This Camway clamp meter worked straight out of the box-apart from installing the batteries! It has a chunky, well made feel to it. I’m not a professional electrician but I do get asked to repair a lot of phones and this meter will make problem diagnosis much easier. It will also come in handy when working on the car!The black case that’s provided with the meter is a nice touch for keeping the meter and all its bits safe. It’s easy to use, the settings are clear with a well laid out instruction booklet to fall back on for clarification.I very much like and can recommend this Camway clamp meter

The media could not be loaded.  Well, this has everything and although an electrician can make more use out of its functions than I can, it still overs a lot for anyone to use, such as using as a room thermometer, or battery tester, although, just using it for those two functions would be a dramatic under-use of this device!For me, as a basic level DIY guy and occasional electronics hobbyist, there are several features I would use and have tested many of them as shown in my video and pictures. The accuracy of all the measurements feel accurate.The meter has a built-in thermometer which gave a close reading of my room temperature as my reliable mercury thermometer. The temperature probe was equally close which I also tested to measure boiling water which gave a reading of 96deg Celsius, and I am guessing was not 100deg due to the heat loss in pouring the boiled water into a cold mug and air cooling.The meter also has an non-contact voltage sensor (NCV) which I tested and used to determine vicinity and tracing of live cables through walls.The standard multimeter functions are all there too, such as measuring dc and ac voltage, resistance, capacitance, checking working LEDs, continuity testing on circuits (including checking for working fuses). Some of which I show examples of testing in my pictures. All the readings of my tests were as expected, so for example, a resistor I tested in my picture rated 1500 Ohms with 2% tolerance showed a reading of 1499 Ohms. Can't expect more accuracy than that given the resistor itself has 2% leeway.The biggest feature of this device is the clamp reading of voltage wires without contact. This I have not used yet as I have no need for that at present and I have no desire to strip a part of any of my mains cables or extensions to test the singular component wires (as the meter clamp cannot read the cables with live and ground together).There is also a low impedance function (LOZ) which eliminates ghost voltages on cables (ghost voltages from nearby live wires can show up on multimedia voltage readings on another wire. LOZ eliminates that "ghost voltage" and read the true voltage of the wire.The instructions manual is basic and not always clear in how to use each function. There wasn't even any mention of how to use NCV. The only useful thing in the instructions is the ranges table of each measurement, the rest of it has some poor English, and inconsistencies. Although this clamp multimedia is easy to use, I suggest learning how to use multimeters safely from reputable educators, first. Then read the instructions to get the gist and more understanding of their specifics to using a function.And when measuring capacitors or high voltages with the probes, I would always wear protective gloves. I couldn't find mine at the time I did the photos and videos, hence why they don't include my testing of capacitors and AC voltages.The probes come with protective covers, and crocodile clips for different contact types.This clamp multimeter pretty much makes my old school previous multimeters completely redundant, giving me more than I could ask for.

Dc clamp meter is accurate and reliable.Test leads are sturdy and the alligator clips that come with it are of good quality

I love how it's semi automatic. Want to measure volts, be it AC or DC and whatever voltage, select V and measure away. Same with with Ohms. No more need to select which range you want.Display can be lid up which is handy in darkish rooms.I'm using this often now.

I don’t want to speak too highly of this meter because then everybody will buy it and it will be out of stock but I’m recommending it to all of my friends. I use it instead of my $300 fluke meter and it works perfectly. It also tells me Hertz every time I check the voltage. I don’t have to use a different setting and waste time to check Hertz. As far as accuracy I know everybody out there will say you can’t get an accurate meter for 30 bucks but I’m telling you it meters just is accurate as my fluke how long it lasts nobody will know, but it’s my new daily driver as far as meters go

Es ist ein tolles Messgerät mit vielen Funktionen für den Hobbybereich und funktioniert sehr gut wenn man sich mit Strom auskennt - Spielzeug ist es keines!Spannung und Strommessungen sind sowohl im AC als auch im DC Bereich gut...selbst den geringen Ruhestrom am Kfz konnte ich problemlos messen!Firmen die auf höher abgesicherten Baustellen oder in der Industrie arbeiten kaufen hoffentlich eh in anderen Preis- und Schutzklassen! Wer hier niedrige Bewertungen gibt weil er mit dem Messgerät überfordert ist sollte die Finger von Strom lassen und sich besser schulen!

Es una pinza muy interesante por el precio. Todas las funciones van bien. Incluso el medidor de temperatura.