Master Airscrew Upgrade Propellers for DJI Phantom 1-3 with Built-in Nut - Orange, 4 pcs

I have a non DJI quad which uses 8.25 x 5 props and I wanted to experiment with different sets from sheer boredom. These Master Airscrew props are 9.4 x 5 which is about an inch longer. The built in nuts are the correct size and pitch and spin on the shafts very smoothly. There are winglets to reduce drag, increase lift, and increase range. These appear to be quality blades. These props make my quad fly smoother, a little quieter and battery life is extended compared to other props which were more expensive and stiff. I tried a set of more expensive carbon fiber props which I have balanced numerous times, but at a certain rpm, a rapid ying yang action starts and I try to bring it back down safely without breaking anything. Although these props are designed specifically for the DJI Phantom, they worked perfectly for my non DJI quad. Master Airscrews did their homework.

Master Airscrew makes a superior product compared to the DJI props. They are more efficient, quieter in a heads up comparison, and have proven to be durable. I use them on my DJI Mavic 2 Zoom, and they work great. They are a bit more stiff than the DJI quiet props, so fold them open before starting up to ensure safety. I just purchased a pair for my DJI Phantom 4 Pro. These are screw on type that require an adaptor (it's included). the adaptors were drilled slightly off center and required "selective mounting" to fins motors that fit the individual units the best to get the screw in. Also, a good idea to Loctite the 3 mounting screws when installing. Be sure you have all your props tight before starting up! I use the Master Airscrew ORANGE props for high visibility. I can see the drone MUCH better and further in clear sky conditions. Try a set out, you will like these a lot!

A bit quieter and definitely more fun to look at then the boring white blades they displaced!

As far as design and functionality, they are great props. I like them better than the oem props. Only downside is I ordered orange, got a box labeled orange but had white props inside.

Well worth the money. Noticeably quieter and perform well. This is my second set I’ve purchased and I highly recommend.

Blades seem as good as originals. The tips of the blades are turned up slightly which may be to improve flight. I didn't notice any difference. I like the vibrant color options which make them easier to spot in the air.

Sounds much less than an angry band of hornets. I wouldn't dare to quantify it, the MAS has a good amount of noise reduction on the P4. Flys well.

Very well balanced, drone flies very stable, longer flight times BUT you might need to thread at least 2 props in my case to 6mm the other two threaded on fine

I order the orange props which assists somewhat with prop visibility at close range. There does appear to be a small but noticeable reduction in noise however I don't know what, if any, effect this has on endurance. Performance seems a little better with these props and they fit/remove from the P3 Pro exactly the same way the OEM units do.