描述
- Specifications · Operating Range: 6 - 12VDC · Torque @ Stall: 12 oz-in.@ 6VDC · Torque @ Stall: 25 oz-in.@ 12VDC · 0.118” (3mm) Diameter “D” Shaft · No load current: 40mA (6VDC) · No load current: 80mA (12VDC) · Stall current: 360mA (6VDC) · Stall current: 1600mA (12VDC) · No load speed: 140 RPM @ 6VDC · No load speed: 270 RPM @ 12VDC · Gear ratio: 100:1 · Motor size: See Schematics · Shaft size: 0.118" (3mm) Dia. x 0.393” (10mm) L · Weight: 0.4 oz · DC reversible motors - Encoder: 12 CPR
- Gear train damage can occur if stalled (locked) Stall Torque is the torque which is produced by a motor when the output rotational speed is zero, it may also mean the torque load that causes the output rotational speed of a motor to become zero - ie to cause stalling. Electric motors continue to provide torque when stalled. However, electric motors left in a stalled condition are prone to overheating and possible damage since the current flowing is maximum under these conditions.
- The Digital Manual Speed Controller provides proportional forward and reverse control of your MicroGearmotor. Simply supply 6-16V to the controller and plug in your Gearmotor. The speed and direction are controlled by the knob. If you are simply needing to operate your gearmotor from a switch, click on the picture of the switch at the right.
- JST 6-pin connector The Gearmotor has a “D” shaped 3mm diameter shaft; use with our 3mm bore pinion gears 12 CPR Magnetic Encoder Use 1.6mm screws to mount the gearmotor. All metal gears!
270 RPM Micro Gearmotor w/Encoder
