ZIRO Tricolor Gradient Matte 3D Printer Filament, Multicolor Co-Extrusion Matte PLA Filament 1.75mm 1kg/2.2lb, Fit Most FDM 3D Printers, Neon

Have had this for a few weeks now and can say it prints well on my Bambu X1C with little to know config needed.The colours are just as shown in the pics and adheres to the print bed fine at 30c for me.

True to colour and good quality

Great quality, colours are lush, easy to use and no stringing. Faster colour change would be nice though

When I saw this filament, I knew exactly what job it was going to be used for - A Massive Tortoise!I highly recommend drying this filament before using it, as I had some quality issues when I forgot to pop it in the dryer.That being said; this 14 hour print came out much better than expected!

one of the best pla's ive ever used not a single failed print, bed adhesion top notch, colour quality is fantastic. i wish i tried this stuff sooner.

I'm sorry Ziro 3D but your prices on this filament do not make sense anymore, are you profiteering as you now it's a popular colour choose. I can't fault this range but your prices again are crazy.Buyers read this, currently as of the 25th Sept 2023 these are the prices for the same filament type.Wood Grain £29.99 - Macaron £25.99 - Matcha £19.99 - Camouflage £17.99Why a huge price difference for the same filament on Amazon UKThere are other options out there and I have already found OVERTURE PLA Filament Matte Sedimentary Rock & Fossil Rock that are similar on Amazon UK for £19.99

I made a couple of prints on this pla and most of them have poor outcome. As you can see on the picture it seems to change behaviour when the colour starts to change, see the middle bit of the printed part. I tried changing temp setting on other prints and I just cant make it print nicely.

Print quality is fine, the images shown for the item are unrealistic though.The colour change takes so long that you'd only notice it on larger print models.

The filament reminds me a lot of satin tafeta fabric. It still has a bit of the silky features but also is more matte. Calling it satin might be appropriate term. This one has 3 colors. Magenta/red, blue, and neon yellow/green. It honestly looks like it has more when it prints but it does only have 3 colors. I printed a textured octopus, a tool part, and a display cover. The display cover is completely flat and what results is interesting but probably not what most people are wanting. This filament pops best when it's used for details and textured models. Also this filament will absorb moisture quickly. I needed to dry it a few hours out of the bag because otherwise it popped and crackled. This is typically true of any matte. But heads up.As for using. Similar issue as most silk filaments. Poor overhangs. May need printed super duper slow to get rid of those. Many issues can be seen on the back of the octopus but the texture hides a lot of them. This was printed at 200c, 65c bed, 60-90 mm/s (varied at different parts like infil and walls).Despite this, this filament is quite nice aesthetically. I will probably buy the other two matte rainbows in the future after I use up this one. Oh and the filament came with a big thick storage bag. Nice.

This stuff prints well and looks awesome! No issues with layer adhesion. With proper settings no stringing issues either. Nice shiny fun color prints. It performs well both at standard and high speeds. I have purchased multiple rolls and will continue to. Something I noticed about my last roll was that it had a twist in it near the middle of the spool and another near the last quarter of the spool. This caused a shift in the colors. However, in my opinion, it made the print that it was used in (dragon egg) more interesting. In other models it may have been an issue. This current roll I’m using appears to have a shift or twist in it viewing from the side, I will be mindful of that when printing however, I don’t foresee any problems as I use it for prints where I really want the colors to pop. I will continue to use it.

I can't express how thrilled I am with the ZIRO 3D Printer Filament, especially the Multicolor Rainbow PLA Filament. It's an absolute game-changer for anyone passionate about 3D printing.The variety of colors in this filament is nothing short of mesmerizing. The rainbow effect it creates in your 3D prints is stunning. Each layer reveals a different shade, creating truly unique and eye-catching objects. It's like having a mini rainbow factory right in your 3D printer!The 1.75mm diameter is just perfect for my printer, ensuring smooth and consistent extrusion. I've experienced no jams or clogs while using this filament, which is a testament to its quality.The matte finish is a fantastic touch. It gives my prints a sleek and professional look, and the texture feels great to the touch. It's perfect for a wide range of projects, from artistic creations to functional prototypes.The filament is also surprisingly strong and durable. My prints come out solid and reliable, which is crucial for functional parts. It adheres well to the build plate and doesn't warp, even during longer prints.The 5-star rating is well-deserved for the ZIRO 3D Printer Filament. It's not just a filament; it's an experience. If you're a 3D printing enthusiast like me, this filament will take your creations to a whole new level of brilliance and creativity. I highly recommend it!

Zuerst war ich skeptisch, weil ich noch nie ein Tri Colour Filament verwendet habe. Zusätzlich schaut das Grün eher Gelb aus, sowohl am Foto als auch in echt. Jedoch hat mich die Druckqualität und wie leicht es zu drucken ist voll überzeugt. Gelb ist auch nicht zu sehen, sondern ein schönes HellgrünGedruckt auf Bambu Lab X1 mit AMS, passt super rein.220° / Standart Einstellungen / Außenwand und oberste Schicht mit 50mm/s

The media could not be loaded.  Imprime genial a 205-210 el acabado es alucinante. Un 10 para este filamento