Dorman49447 Windshield Wiper Linkage Bushing Assortment Compatible with Select Models, 10 Piece

Arrived in excellent time from the USA, trimmed off the flanges as suggested, added a washer, popped on, hey presto Forester wipers working correctly again.Edit 2021: here we go again- glad I kept the rest of this kit, just used another piece on the same problem with Saab Aero!

Mercedes wanted £200 for a new linkage as they don’t provide parts separate.Tried my luck with three and it paid off.Linkage was still popping off on when full speed so added two o rings around the pin that goes into the plastic bush and it’s working fine.

This kit had the sizes I required for my model of car. They work well.

Fue muy dificil instalarlo, para alguien sin experiencia, ayuda mucho usar una pistola de calor, pero el producto funciona ideal recomendado.

I used this kit to fix the wipers in my Xterra. The kit came with an assortment of 4 different types of wiper linkage sockets. I ended up using the one circled in red. As per instructions in the package, I mounted the bar assembly into a vice grip and drilled out the old socket using a 3/8 drill bit. I then attached replacement socket to the bar using the vice grip and a large socket from my socket wrench set, and pushed it into the bar by tightening the vice grip. I then removed the whole thing from the vice grip and re-attached the bar with the new white socket to the small passenger side rotating bar, and re-attached the whole assembly to the car. So far so good, it's working normally.

Used on a 2005 Subaru Legacy. Followed a how to on a forum.........worked ok.....

I have a 2005 ponitac sunfire and the passenger side wiper disconnected the linkage and stopped working. After searching videos for fixes I was able to figure out I could repair it on the cheap with just a bushing replacement. It did the trick and the linkage is secure.