Rev up your ride! 🏍️ Unleash the power within.
Liqui Moly MOTORBIKE OIL ADDITIVE is a high-performance oil additive designed to enhance engine efficiency, reduce wear, and lower fuel consumption. With a compact size of 5.4 x 5.4 x 12 cm and a weight of just 112 g, this product is compatible with various filters and oil bath couplings, making it an essential addition to any motorcycle maintenance toolkit.
| Manufacturer | Liqui Moly |
| Brand | Liqui Moly |
| Model | Oil Additive |
| Product Dimensions | 5.4 x 5.4 x 12 cm; 112 g |
| Item model number | 1580 |
| Manufacturer Part Number | P000022 |
| Item Weight | 112 g |
J**Y
It does work with wet clutches despite other reviews
Love this produce. Using it in a 200whp 2022 hayabusa. Bike is smooth and quiet. Instructions say for wet clutch application use no more than 20ml. I used 20ml as instructed and wet clutch is holding fine.
J**E
Noto el cambio más suave
Noto el cambio más suave pero no se quita lo de no poder poner el neutro fácil! Sigue arrancando pero bueno! Algo de mejoría noto en el cambio !
T**T
Used on Triumph sprint 955i
Was very sceptical about oil adaptives but having a first jen triumph 955 that are notoriously noisy especially on tickover thought I'd try this as it was recommended by of a couple of friends that have used it in their bikes.Using the recommend amount of 20 mm (measured with a syringe) for wet clutches whent for a ride and almost five to ten minutes could tell a difference. After about 45 minutes of riding when all up to temt and mixed in I can honestly say I can tell what I would say is a big difference.Gear changes are hugely smoother, seems to spin up a lot nicer and generally vibration from engine on tickover and riding are smooth and crisp and no problems with clutch slip. I would recommend this for any one as long as you use the right amount and you'll have plenty left for oil changes or another bike.
C**N
super
très bon produit, améliore bien le passage des vitesses du des motos des années 90.
T**R
works great in a forestry clearing saw
Been running this stuff in a husqvarna 555fx clearing saw, and I'm very satisfied with the results. Much smoother and faster throttle response. Not a big gain in fuel economy (maybe a bit).The only thing is molybdenum disulfide sticks to everything so dont be alarmed if the jerry can and nozzle have a metallic like film on it (make sure you give the can a good shake before filling tank) .Far as I can tell the fuel filter doesn't gum up by this nor is the carb( but I use seafoam in my 50:1 mix). One last thing to mention for 2stoke mixing it only requires 1ml of moly per liter gas l,so it will treat 125l of fuel (1000 to 1) mix.Extremely coast effective. Also can be ran in wet clutch systems, the stuff is truly magic. Just buy it ,you will not be disappointed!
TrustPilot
1 个月前
1天前
