ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY

For the money, it’s pretty nice. Cut some pretty thick metal.

Been using the cutter for a few months. My only complaint is that since it's a "drag" type cutter it goes through the consumables pretty fast. The bright side is that the replacements for the cutter are not expensive and very easy to get. The air pressure regulator is a little touchy but works as required. I have a small shop compressor so I have stop cutting when I hear it kick on. I've only used this on 250VAC 50 amp supply so i can't comment on the 125VAC operation. I've cut everything from 18 gauge sheet steel to 3/8" steel plate. Not exactly industrial strength but it works great for my hobbies and repairs. Controls are simple and easy to use.

Awesome cutting machine. It's so simple to use and makes greats cuts on 1/4" & 1/2" steel. Just follow the recommended settings for amperage and air pressure that are on the website. What little slag was there chipped right off with a slag hammer. Should have bought this sooner.

I use this on a 240v circuit on sheet metal and up to ¼” steel plate. The cuts are clean enough when you get going and the price is excellent. I didn’t realize when I bought this that it was a drag tip cutter, but once you get used to drag cutting it works well. However, compared to a non-touch cutter like the plasma arc cutter I used previously it’s a bit more work keeping the tip clean enough to get a good start. I often have to give the tip a quick light sanding to get a good start. I also find it’s more prone to blowback so it’s good to have additional replacement tips on hand… fortunately they are cheap enough. For now it’s doing the trick pretty well but I’ll probably spend the extra to upgrade to the plasma arc version at some time. Overall the machine seems solidly built, the display is good, and it performs well for a drag tip cutter.

I have had this little chinaman for about a month now , so far so good ! I have been welding and fabricating 40+ years . I have cut mild steel, Stainless steel, and aluminum without any issue. I haven't done any big jobs yet , but does cut pretty well . Does not seem to get to hot on small jobs 75 PSI seems to be the sweet spot on the air. I will update review after further use. For the price point I'm pretty impressed remember its 250 $ not 2500 $ !

Great machine at a great price. Very easy to set up and very easy to use. And is also small enough to carry around anywhere

Do not buy this unit. The customer support for this product is by far the worst I have ever received. I purchased this unit in Jan of 2024 and used it for some light sheet metal cutting 3x using a standard 120v outlet. The first 3x it worked perfect. The 4th time all I could get it to do was spark. I did multiple things to trouble shoot it, including checking the outlet volts , putting a new tip on, etc. I even consulted my son who has a certification in welding. After no success I reached out by email, to the company for product support. I was advised to check the tip, which I had already done, but did it again. Then to check my air pressure and adjust, no change. They then they advised me to adjust my settings. Again I did and sent a email I was compliant. Then they requested I video the machine just sparking as I adjusted the settings and send it to them. Again I did it, remember I had only used it like 3x for light sheet metal, there was no good reason it just quit. Then I was advised to check my outlet voltage and again send a video. After going back and forth for an extensive period of time, never receiving a call and being treated like I never picked up a welder or plasma cutter, I finally sent them an email about supporting their product better and either fixing or exchanging the unit and never heard back. I finally gave up. Let the non working unit sit broken in the garage for a year and a half and pitched it in the garbage.

Arrived quickly Easy setup. Played with a little bit, pretty impressed so far. Cut through 1/2 inch steel quick and clean. Not great for ling time use, 2 to 3 minutes, then let cool for a couple of minutes

Das Teil Verdient 10 Sterne es schneidet problemlos auch dickes material ohne probleme der schnitt ist so sauber das man nichts nacharbeiten muss es ist wirklich ein hammer Plasmaschneider ich habe es schon sehr lange und noch immer die erste Düse drinen ein wirklich geiles teil einfach perfekt

Es una tomadura de pelo.

Fa bene il suo

Works surprisingly well. Does all it is advertised to do.

Works like a dream . Cutting thin metal at the moment But it seems to work pretty good Used it all day outside -15 Perfect tool for little cost Highly recommend for the do it yourself person Great hobby unit