DOT 9 Inch LED Headlights Headlamps Assembly Compatible with 2018-2025 Wrangler JL JLU Gladiator JT, Hi/Lo Beam with DRL

This is my second set of RamJet LED headlight assemblies I've had the chance to work with (first set was on another vehicle) and I can confirm the quality of their lighting assemblies is top shelf. This set comes with a complete kit including everything needed for install. Lights arrived in pristine condition with no damage to the box or contents. Shipping was quick (received within 48 hours of ordering), lights looked sharp the moment I opened the box, and completed the installation the day after receipt. Install time: 30 mins - 1 hour if you really take your time. 3 10mm bolts to get each headlight out after removing the front grille. Spent the most time routing the wires for the DRL to the fuse box (used the included add-a-fuse). Installed these on my girlfriends 2019 Jeep Wrangler Rubicon Unlimited and am extremely happy with the outcome. Pictures included in my review show the crisp and clean light output as well as the side by side comparison. The listing for these states they work to replace the factory halogen headlights, but I can confirm these also fit and are directly compatible with models equipped with the Jeep Performance LED headlight package from the factory as that is what our Rubicon had. DRL and halo LEDs look great day or night. Highly recommend these if you are looking for quality lights that stand out from the others on the market and come with great customer service/build quality!!!

Easy install, just wish that there was better accessibility to run the wire in the fuse box. Bright lights, good visibility. My truck has a 3” lift with 35” tires, adjusted the lights all the way down and it worked out well. Hard to adjust when installed, but a little patients goes a long way.

Fit is perfect. Plugged in and had drl without issue. Great instructions. Incredible cut off line so I don't blind oncoming traffic. Best after market lights I've purchased (5th jeep)

Installed these on my 2021 Jeep JLU in about 30-40 mins. I’m pretty meticulous though and some of that time was figuring out the best way to route wiring and stuff. These lights are bright and the patten has a very nice cutoff so you don’t blind oncoming traffic. I had LED bulbs in my factory halogen housings. They were bright but the pattern wasn’t as good as these. The addition of the Halo looks great also. There is an adjustment on the rear of the housing if you need to adjust them, I did not need to in my situation. I’m very happy with the lighting and the way they have changed the look of my Jeep. Slowly I’m turning this thing into a Jeep that looks way nicer than the Sport model it started out as. I definitely recommend these lights. The directions I got were not 100% clear so below are a couple pointers for the things that I found were not clear to me. The removal and basic installation of the lights are very straightforward. After the housings were installed I ran the wire from the driver side to the passenger side under a plastic piece that covers the radiator. I zip tied the wire up to some other harnesses over to the passenger side. The passenger DRL connectors connect together and then run the wire along the passenger side engine compartment towards the fuse box. Next, I decided to modify the wiring slightly for a cleaner install. I stripped about 6” of jacket from the DRL harness so there was more wire exposed. This allowed me to bring the power in where the main power terminals also enter the fuse box while also having slack to connect the ground wire. You’ll need to remove the 20a fuse at location F52 and place that 20a fuse in the bottom socket of the piggyback fuse tap. The supplied 5a fuse goes in the top socket of the fuse tap. After I crimped the wire together, I taped up the wiring for a little extra protection. The ground ring terminal connects to the stud on the passenger engine compartment. After that’s done check to make sure everything works and zip tie the rest of the wiring out of the way and reinstall the grille.

I love these lights. Took 10 minutes to install and work great. It was a struggle to get the grille off only because I have a winch. I did break a little light but outside of that it’s a great addition super bright for the winter nights. I live in Utah and we get snow often so I’m excited to see better at night. It’s a good looking and looks like it’s supposed to be there I’m very happy.

Put these on my 21 gladiator and replaced the old stock halogen. Make a world of difference so far! I hooked driving lights up to accessory switch panel for separate function.

The lights fit my 92 yj good. The lights are very bright and have a nice focused beam to them. They look awesome on the jeep and highly recommend them to anyone looking for nice led headlights. Best bang for your buck Lights I've had so far. About 100 bucks on amazon.

Absolutely love these gives a great look to the jeep and compared to the stock halogen lights it's like have spot lights not it lights up the road I front of you with ease could not be happier! Install was simple!

Mejora la iluminación drásticamente es un producto que cumple con lo prometido

Looks amazing! Good light and drl Super easy installation, I hope they can resist a few years! I’m happy

These look awesome, bright, the high beam is so much better than the factory halogen. I wired the drl halo to a switch bank instead of the fuse option but it provides sufficient wiring to do either. The headlights themselves went in with ease and work great. Instruction sheet is minimal but sufficient

Excellente qualité et très beau look

Amazing lights! Super bright. The high beams are insane. Looks like your using a light bar.