Microphone Boom Arm with Desk Mount, 360° Rotatable, Adjustable and Foldable Scissor Mounting for Podcast, Video Gaming, Radio and Studio Audio, Sturdy and Universal - Elegance Model

This thing is costy but its sleek. It's a good quality and has built in cable management. I'd say it's worth it. There is a clamp that clamps to the desk, and the boom arm slides into a hole in the clamp. There isn't anything securing the two though.. It has never fell out or shown any signs of coming close, but I always thought that was weird. I've had the thing for years, although it resides at a PC set up at a house I don't go to often, but it is great quality and nothing but fair for the price.

Like others have mentioned, it has a limited range of motion. To be specific, the issue lies with the first part of the arm which extends immediately after the mount which attaches to the desk. This part can only adjust about 30 degrees either direction past center while the second part of the arm can fold nearly 180 degrees. This means that you absolutely must have clearance of at least 2.5ft directly above where you attach it to the desk because regardless of how you tilt it, the first part of the arm will always be aiming mostly straight up with perhaps a slight tilt (or straight down if you mount it upside down or straight to the side if you mount it sideways). I'll be honest, when I first went to set it up, I thought that I'd have to return it due to how limited the angle of adjustment was, however I quickly realized (probably like most people here) that I just needed to mount it differently than I had envisioned in my head. I'm 100% happy with it now that it's setup and it's very easy to lock into place where my heavy mic doesn't move at all and it feels sturdy enough to be around for a really long time. The way I have it installed, my mic is super close to my mouth but is barely visible on camera while holding the heavy microphone out at an awkward angle and yet it doesn't struggle at all with no visible slipping. This was exactly what I was hoping for.

I have a blue yeti attached and this mic has held in place for quite some time (several months) without faltering. The yeti is a heavy mic so this arm has been amazing. It is easily adjustable, the stand that attaches to the desk is very sturdy and very well made. Very heavy duty. Looks and functionality are fantastic. It looks nice, gives the appearance of being very high end, and makes for a very professional look. As for the finctionality, it is easily adjustable, stays in place without sag or droop. My previous mic arm would constantly start off in a high position and within about 5 minutes be at the desktop level so I had to constantly readjust it. This one stays on place at the position I want. There is a track at the top for cords (a cord chanel) which hides the cords and makes for a very clean look. It has three adjustment points that can be tightened which helps maintain the position of the mic. Overall very good mic arm, well made, and certainly a good value.

This is a very solidly built mic arm that feels sturdy, has great built-in cable management, and it looks very nice. The big thing for me personally that takes off a star is the very limited range of motion. I added photos comparing it to the cheap spring loaded mic arm I was using before. It is better in every way but the range of motion and in turn, the increased size it takes up on my desk is considerable compared to the cheaper arm. A comment for the photos: - the first photo is of the two arms completely “tucked away” - meaning that is minimum gap you can expect to get between the 2 main sections of the arm. The cheap arm flexes so much that the two main arms are essentially parallel which was great to save space on my desk and get it out of the way when not in use. This mic arm does not flex nearly as much so requires some creative maneuvering and twisting to keep it from blocking my left screen when not in use. - the second photo shows the arms fully extended - for me, this was how far and flat can I get the 2 sections to be. The cheap arm can lay pretty much completely flat on my desk - excellent range of motion. This mic arm flexes enough to more than get the mic near my face but the arm higher in the air and is going to require me moving it further forward on my desk to, again, avoid blocking my left monitor. I am not sure why people have rated the range of motion of this mic arm so highly considering this. Again, this may not be a problem for some people but definitely worth knowing before getting this mic arm. Hope this helps anyone considering this. Other than this, it’s a really great piece of hardware so far.

Replaced a spring arm that only had limited range with this. The old arm couldn't make it over the monitor nor could bend in the direction I wanted. This one works out perfectly as you can see in the photo space is tight and this is exactly what I needed. Highly recommended!

Sencillamente no tiene un pero. Completamente premium prácticamente todo metálico. Muy buen tamaño es grande. Sin duda cumple todas mis expectativas. Muy premium.

Super très bonne qualité mon fils est super heureux

Ich habe den IXTECH Mikrofonarm für mein Hyperx Quadcast und meinen Blue Yeti gekauft und bin absolut begeistert! 😍 Robust und Stabil 💪 Dieser Mikrofonarm ist unglaublich stabil und hält mein schweres Mikrofon ohne Probleme. Egal ob ich streame oder einen Podcast aufnehme, der Arm bleibt immer in der gewünschten Position. Keine Sorge mehr, dass mein Mikrofon wackelt oder verrutscht! Vielseitig und Flexibel 🎯 Was mir besonders gefällt, ist die universelle Kompatibilität. Ich kann ihn für verschiedene Mikrofone wie das Rode, Shure SM7B und viele andere verwenden. Der Arm lässt sich einfach verstellen und passt sich meinen Bedürfnissen perfekt an. Ob hoch, niedrig, nah oder fern – dieser Mikrofonarm kann alles! Stilvoll und Elegant ✨ Nicht nur funktional, sondern auch ein echter Hingucker! Das Elegance Modell sieht auf meinem Schreibtisch fantastisch aus und fügt sich nahtlos in mein Setup ein. Ein echter Bonus für alle, die auch auf Ästhetik wert legen. 😉 Einfach zu Montieren 🛠️ Die Installation war super einfach und schnell. In wenigen Minuten war alles fest und sicher montiert. Die Anleitung war klar und verständlich, sodass selbst Technik-Neulinge keine Probleme haben sollten. Fazit 🌟 Der IXTECH Mikrofonarm ist eine hervorragende Investition für jeden, der ein stabiles und vielseitiges Mikrofonhalterungssystem benötigt. Er sieht nicht nur gut aus, sondern bietet auch eine Top-Performance! Klare Kaufempfehlung von mir! 😄👍

Ottimo articolo, progettato per soddisfare le esigenze di chi ha bisogno di un supporto mobile!