Amazon Basics Portable Hard Camera Case for DSLR Equipment, Customizable Fit, Protective Water Resistant, Medium, Black, 18"L x 14"W x 6"H

When I ride (ATV) I take a Go Pro, two Garmin Montana 600 GPSs, a Nikon AW-120 rugged camera, spare batteries for all of those and chargers. The first case I had for those was rubbish. The sides bent under minimal pressure because it was thin plastic. I did not want to repeat that with this case. I wanted a case to carry just my camera with the lens I use for general purpose, rugged and waterproof because it's going fishing with me. I am really pleased with the outcome. First, the case is MUCH nicer than I expected. It is a lot sturdier and much better made than I expected. It does have an "o" ring seal around the opening so it should be waterproof. It also has a pressure relief valve. And the pick-'n-pull foam is sturdy, not thin cheap crap. My method of putting the camera on the foam and drawing an outline with a yellow highlighter worked pretty well. As you can see from the photo without the camera I left some foam on the bottom level to add support on the underside. I left some extra space where the lens attaches to the body so I can get my hand/fingers around the lens to lift the camera out. And in the last photo you'll see I added the two spare batteries. Again, I am really pleased with the case and would highly recommend it. I think it is very good value for money. If I decide to build a bigger case to carry additional camera equipment, I will definitely get the big brother to this one.

I'm bummed because the only thing wrong with this case was that the interior dimensions turned out to be too small for my camera and lenses to fit. I've attached photos of the actual interior measurements so you don't make the same mistake. So, sadly, I have to send it back and keep shopping. Otherwise, this case is awesome--built like a tank and is an incredible value for the price (especially with Black Friday pricing). I'm confident you could drop it off a 2-story building and your gear would be fine. I just needed it to be about 2-3 inches bigger on one inside dimension.

Others have written (positively) about the general features of this case and I concur with those conclusions. But I wanted to leave this review for a specific use - holding a set of the Rokinon/Samyang Cine-AF lenses launched in 2023. This case is as close to perfect as you can get for this purpose - and at a really great price. I ordered this case the same day I ordered my new set of Rokinon Cine-AF lenses. I had been looking for a hard case that would fit the set well (not too big, but still enough padding.) The measurements on the product description indicated this would fit the bill. The lenses and the case arrived the same day and after (carefully) pulling the pick-foam from the right spots, it became clear the case was exactly what I needed. The fit is snug, but snug is safe. There's even room for a fifth lens when the 20mm comes out. The latches are tight, but I suspect they'll loosen up some over time.

Really good stout case, not the easiest foam to modify but just make sure your blade is sharp and you shouldn't have any trouble making spaces for your items. Foam waffle weave glued to the lid and comes in two layers of pick foam on this model each about 2.5" thick plus there is a solid layer of foam under these about 1" so there is a lot of padding available. Very secure once you close the latches and lock them down, should protect things well. All that being said just like any of these small cases/safes even if pad locked or securely closed, if you want to open them and don't care about the case, a small 3lb sledge will probably crack any of them open without too much effort. Just be aware of what purpose it is serving. Was bought to organize and protect some electronics. Great all around case and highly recommend it.

Good size, very solid, well-built case with a secure but easy-to-use locking mechanism. The dual-layer pick-apart foam padding works well. Gear transported in this case is well-protected. My only gripe, and it's turning to be a big one, is that the case doesn't sit evenly on its long edge (with the handle facing up, like a briefcase would). The bottom isn't balanced and as a result the case leans badly to one side, nearly falling over. Seems like a major design flaw. Other cases in the same size and class by other manufacturers sit evenly and solidly on a level surface like a table or the floor. Can't imagine what Amazon was thinking on this one.

Very nice product and very high quality comparable to other name brands. Will buy more when needed.

Just as expected. Every bit as good as its Pelican counterpart. The handles on this one are actually better, in my opinion than the Pelican. Foam is a little nicer too.

Being retired military, I have used dozens of Pelican-brand hand cases (and many no-name brands). It's hard to beat the absolutely indestructibility of a true Pelican case. However, this case comes very close and at nearly half the cost. No, I did not expose this case to the rigors I put my Pelican's as replacing them would be on my dime, not my rich Uncle's! If you need hard-case storage, I highly recommend checking this out - I doubt you will regret the decision.

ペリカンを買うにはちょっと高い、それほど防雨とか気にする必要が無いのでリーズナブル、かつ堅牢なもの、と色々探してレビューなんかも参考にしてこちらを購入。他のAmazon Basicも信頼していましたが、こちらもしっかりした作りで全く問題ない商品でした。中のスポンジもたくさん入っていて切れ目も入っており色々と良心的。小と大だけみたいですが、真ん中のサイズも作って欲しいな

Het is een goede koffer, maar de maten die beschreven staan kloppen niet helemaal, de lengte en hoogte kloppen, maar de breedte komt te kort geadverteers voor 34cm, in werkelijk is dat 30 cm, die 34 is alleen met uitgestrekt handvat...

Surprisingly good hard case at a fraction of the cost of a Pelican or HPRC. It's well made and very strong with two layers of pluckable foam, a lower layer of fitted foam and egg box foam in the lid. The foam plucks easily (I used matchsticks to mark the corners prior to plucking) but is strong enough not to separate in use. The two pluckable layers make it easy to vary the depth for various items, such as the XLR adapter and handle in the photo which only need the top layer plucked. I normally buy branded cases for camera equipment but thought I'd give this one a go for my new GH7 rig as it required a fairly large case which was going to cost the price of another lens! I'm not disappointed, however we'll see how it performs in commercial use over the next few months. The only slightly negative observation is the case latches are very stiff, more so for closing than opening. I would have preferred the latches on the bottom section with a two stage operation, rather than on the lid in a single operation. Hopefully they will ease off over time, and better stiff than loose. The two handles are a nice touch, and the pull-along handle extends via a spring loaded mechanism by pinching two latches recessed into the case base. Fully retracted it acts as a handle on the top of the case, with no chance of it pulling out in use. The wheels are good quality and fitted using a nut and bolt with a spring clip to prevent them coming off, a fairly premium feature. They are also pretty quiet when pulling the case, unlike some. Overall I would recommend this case to protect expensive equipment, it may be Amazon Basics but there's not much basic about it!

Llegó en excelentes condiciones y a tiempo. Luce de excelente calidad, es amplia, rígida y bastante robusta. Hasta el momento no he comprobado que tan impermeable es. Me ha permitido almacenar de manera segura instrumentación electrónica de mano.

It's just like branded explorer & pelican, even thomann. They are from Germany and italy made. But amazon products not less then with very good price, I just today rec'd 1 case and order another 1, if I say what dose it's use for then Might be price gose high. Better if amazon develop metal mechanical locks along with present plastolic buckles, while there is lock holes which you can use as lock seals wire it's remove only by cutting. Anyway, good product. Thanks a lot.