LightingWill 10pcs/Pack Strip Wire Solderless Snap Down 2Conductor LED Strip Connector for 10mm Wide 5050 5630 Single Color Flex LED Strips

This is and excellent product for connecting to single color LED light strips. You will want to use shrink wrap or electrical tape to secure the end of the LED light strip so that it does not come off. This product is very easy to use and works very well. I would highly recommend it if you are cutting custom lengths of LED light strips and don’t want to have to try and solder wires to the copper pads.

I used these connectors on 10mm led strips that I used to convert the flourescent lights in my motorhome. They are simple, fast, and work like a charm. I didn't have any problems. The connections were positive on the first try. This is the best option for this type of project. No need to try to solder wires on these delicate LED strips. Just for your information, I used the tip of my pen knife to slightly lift the connector tabs on these to make it easier to slip the end of the LED strip under the tabs. I also used the pen knife to gently scrape the copper buttons to a clean shiny condition before inserting the strip and snapping the connector closed. Piece of cake.

The only problem I had was in order to slip the other LEDs and I had to kind of pry it open with a small flathead screwdriver and then press it back down. Besides that it’s awesome!

Easy to install. Looks beautiful.

Does exactly what it is supposed to do. I've installed LED's in my RV with them and all lights are working well. Only thought is that in one or two places in the RV the wire that comes with the solderless connectors was a bit too short and I had to add a length of wire to make the connection

I got 2 different version of the same product . 1st version seems to be fine but hard to pick the led strip Through the wicket . They have fixed in the 2nd version & better quality ( I guess) but the plastic circuit strip Is unreliable . For something of them are broken I.e., only 2 works out of 3 or some connects are very loose . Doesn’t keep the connect intact . Bit of unreliable product . I would rather look for another one .

I handed these clips to a friend with absolutely no experience or any real understanding of LED light strips. Even though he is not handy, he had the clips in place and the lights turning corners in just minutes. Once I showed him how to snap open the clip without breaking it, it went easy. He kept saying "positive to positive and negative to negative" as he ran LED strip around the back of my mirror. He made it sound easy, so I gave it a try. Even being totally blind, I managed to connect the strips the first time every time. I was not as fast, but the end result was exactly as bright and beautiful ... so I am told. This product works.

To add to my original submission, this is a photo that came out surprisingly well in a dark room. You can see the connectors in INACTION, both the straight ones and the L-shaped ones. The whole picture is supposed to be lit! I've had a terrible experience with these! My installation is a roughly square configuration mounted behind a very large wall hanging from Ikea. I used self-adhesive LED strips to back light the picture. My initial installation resulted in wasting several of the L-Shaped connectors so I decided to buy an all new set. The items are snapped together and are supposed to make good contact so the entire square stays lit for a very classy mood light in my bedroom. What I get instead are intermittent failures to connect, making my mood sour. I've tried hammering them, pressing them really hard or softly--to no avail. They just are not making good enough contact to work consistently. Consequently, I cannot recommend the usage of these connectors. I use both the straight and the L-shaped connectors in my circuit. They all work at first, but after a week or two, they fail. I will keep searching for a brand that actually works all the time. I will most likely end up creating a solder connected wiring circuit instead since the wires are not visible behind the picture.