Super Gloss Coating Epoxy Resin

So this is my review after using a full gallon of their resin. I am a small custom skateboard and sign shop out of Clearwater FL pier 60. I found this resin to work perfect for all of my applications. It has excellent consistency I love the fact that it’s a 1:1 making mixing effortlessly. It is crystal clear and NON TOXIC this is a must for cutting boards. It’s 100% made in the USA and customer service so far has been spot on even on Memorial Day I received an answer to a question. Above and beyond IMO. The set time is also absolutely an excellent balance of resin temperature and work time. Approximate work time of 20Mins+- this leaves plenty of time for corrections or clean up for those of us that aren’t perfect. Since my initial purchase I have already ordered another gallon and will be buying in bulk 20 units for a extra discount. Ask them and I’m sure they will be happy to oblige. Other than wishing it had a pour top on the bottles I can’t think of anything negative about these. Even the pricing is spot on. Oh a little tip buy a bottle of pure alcohol for small clean up or for your hands when working with epoxy. Just be careful not to get it onto your molds.

This epoxy was excellent for my project … exceeded my expectations and turned out great for my first ever project like this and first time to ever use or work with epoxy resin . Follow the instructions which are easy to follow and your golden. Highly recommend

Takes a lil Long to harden but that could be due to weather conditions, minimal bubbles and minimal cloudiness ❤️ good product

Great price for a good quantity of resin and hardener. I didn't realize it can't be used for thick pours, only 1/2" at a time, not a big deal though. 24 hours after using the resin, my work is still tacky and causes the items to stick together, but that is probably due to my error. My project also had tons of bubbles that I couldn't see until after it cured. I used a torch for heat on it and didn't work so well. Hopefully with a little more practice, I'll get it done.

Like most epoxy, if you get the ratio off, it won't dry properly.

Be careful this turns yellow!! We did our countertop and it was so pretty for a week or so! It’s not awful yet cause it’s only been three weeks since we’ve done it but every day we notice more yellowing and I’m afraid we will have to redo this all soon 😢 three stars cause it was easy to use- def time consuming! And looked so good at first. We followed the instructions to a T!!

This is a good quality resin and comes out very clear if you mix it properly. Here is the best tip for using tis resin to make sure there are no bubbles..... The resin needs a little warming up! Make sure the tops are on very securely. Fill a container or the tub with hot water only and set the jugs in the hot water for about 15 to 20 mins the pour and mix your resin. Use a torch on the top layer to remove any remaining bubbles and let cure! Perfect!!

The media could not be loaded. Here are things yoy should know about this resin. You need a torch or a heat gun. A lighter is not strong enough to all the bubbles out. Mix SLOWLY! THEY STRESSED itttt so i will stress it.. It will hurt your hand but its worth it. Weigh the two parts down to the oz. Like have a scale, it dont matter weight they are in the cup but they both have to be exactly the same! Or else you wont get a perfect one. And if you like having time to work with the resin dont do it in a hot place. Make sure your area is like 70°. Cures in about 14-16 minutes. I have no issues with it. Will buy again.