MagVent MV-180 Magnetic Dryer Vent Coupling

My metal dryer duct goes down thru floor and very close to wall. This is a great product. Easy to install. Put part on dryer with magnetic and push back and lines up perfect. No more long extra white hose that bends and gets squeezed when pushing dryer back, Make it easy one a year to pull dryer out use blower on inside and clean out lint. Have used brushes on drills and regular cleaning, once a year for single person keeps bent clean, always hand clean outside flapper. This is a true time saver and allows one to push dryer back farther.

Best purchase in a long time. I’ve never had a more solid dryer connection than this! I have them on all three of my dryers and they work great for new home construction and I’d say be simple to install on existing. The manufacturers built this thing sturdy and it’s a hard magnetic connection so I can just connect the dryer to it and slide it in place and the magnets will pull it directly into place and I don’t have to mess around trying to align two four inch pipes around each other.

Worked out great for my set up..the product is great quality and easy to set up...I saved 10 inches in my laundry room pushing the dryer back!

Had my new washer vent coming out within 3 inches of the wall vent. Couldn't use elbows or flex because I had no access on either side and needed to get the machine all the way back. This works and solves the problem. Here are the comments: -Installs to wall very easy. Cut your duct flush with metal snips and this fits right into it with a cone shaped tail piece. Wall anchors included. Don't flex the backing plate out of shape when attaching to the wall. -Alignment - I was 2-3 inches lower and 2 -3 inches side to side away from the wall vent. Took a couple of tries to get the bends just right in the hose so it would hit close enough to attach. This was a blind installation. Took 3 tries and the machine (washtower) is over 300 pounds to move in and out so not easy. But you can "pre set" the magnet on the end of the hose in the general location of your wall plate if you measure and align. The hose is rigid enough to state generally where you set it. To help align it I looped a light weight long electrical cord under the flex piece attached to the machine and over the top of the washtower and when I got it about 2 inches away from mating, I realigned by carefully lifting and moving the magnet flange over to where I needed it. Used a mirror to see from the top. Hard to explain but it works. -When attaching the duct to the dryer, the dryer outlet was a little smaller than a typical 4" pipe so on the first try of clamping the metal pipe to the dryer pipe, the metal flex pipe ripped badly right near the hose clamp. Had to cut about an inch or 2 off the metal flex pipe with snips and on try number two I put a larger diameter coupling over the dryer pipe end then clamped the flex down over it. This helped but still had slight tearing where the clamp gear is on the hose. Likely needs some tape over the clamp and hose on the end near the dryer. Wish they had made the end of the hose an aluminum coupling that could be clamped on instead of clamping the hose. - Hose is not replaceable so if you tear it bad it is gone. I would be very careful with the hose. It is metal but it is very thin. - Magnet holds pretty well but you dont really know (if you cannot get to the back/sides of the machine) if it is properly connected and sealed. Hard to see from the top of the machine with a mirror. Overall a very good idea that needs a little more improvement to make it 5 stars mostly on the quality of the hose and where it connects to the machine.

I like the fact that it is made in the USA. The magnet is really strong and comes together with a loud click. Had to modify it some my installation but wasn’t a big deal. Definitely air flow is much better now and even whistle’s.

We bought one from Amazon back on 11/26/25 and never received it, along with other items, lost by USPS. Purchased another MV-180 Magnetic Vent Coupling on 12/16/25 and received it a few days later. We mounted the MagVent in our wall of a newly constructed house per instructions and it was very easy to do. I have to admit, when building our house, we took careful measurements on the placement of the dryer exhaust vent based on dryer manufactures PDF file specifications. Dryer vent hole in our wall was within 1/16" or less for alignment to the dryers vent outlet hole. Even with an exact matching alignment, trying to push the dryers rigid pipe vent into the wall hole was still hit or miss. This is where the MagVent MV-180 shines. With all the components mounted as per instructions, simply sliding the dryer back into place is all it took as the magnetic did the rest. Perfect alignment and seals very well with no air leaks. A very good invention that takes the guess work out of trying to configure exhaust hoses and connections when it comes to dryers. I highly recommend MagVent MV-180 for both new and old construction dryer venting.

Excellent product, makes pulling out dryer so much easier and now I can leave the washer in place. The offset is 3 inches, so when I push it back I get a long screwdriver and wiggle the dryer end connector around it snaps right in place, good strong magnet. Going to make cleaning out the vent so much easier and quicker.

I decided to modify our dryer's existing and much too long vent tube connection with this MagVent 180. Because the dryer's vent location versus our laundry room vent port offset was well within the recommended 3-inch maximum, the MagVent 180 fit like a glove. Installation of this high-quality device was very straightforward and the magnetic connection "snapped" into place without any fuss. Our dryer now operates with a straighter and much shorter (versus snaked) exhaust which will most certainly improve efficiency. i would, without hesitation, recommend MagVent!

Facile a installer et fonctionne comme un charme 👌

Perfect for My Job , 5 Stars

Façile a installer. Plus de torture a déplacer la sècheuse pour faire du ménage. Clic on, click off .

Works great, good quality. This allowed me to get my dryer way closer to the wall than any other solution had, big difference. Use when you're trying to push the dryer on those last couple inches from the wall. Strong magnet means it finds its home easily and beware, it has been known to snap on unsuspecting fingers...

It was not as easy to install as I had hope. Works well when properly lined up but you have to be careful otherwise it can leave a gap. It took me about 90 minutes to get it setup properly. Works best if berthing lines up but if the dryer and outlet are offset it’s a bit trickier.